Hazardous Materials

ASP461 – Respuesta técnica a incidentes con materiales peligrosos

Descripción

Este curso está diseñado para técnicos industriales encargados de responder a incidentes de materiales peligrosos, así como para los que responden a emergencias relacionadas con el transporte de materiales peligrosos.

Full course information and schedule

Contact Information

Customer Service
Datos de contacto
Phone: (866) 878-8900
Email: annualschool@teex.tamu.edu

EOT225 – Hazwoper for Clean-Up Operations Training Online

Working with hazardous materials in a safe and responsible manner ensures the health of workers and mitigates danger. This blended-learning course educates UXO Technicians and provides awareness of potential hazards encountered at hazardous waste cleanup operation sites. Upon completing this course, participants will be aware of the purpose and limitations of safety equipment and ensure workers safely avoid or escape dangerous situations.

This course meets Texas Commission on Law Enforcement (TCOLE) requirements Hazardous Materials Course #3806.

Full course information and schedule

Contact Information

Institute for Law Enforcement and Protective Services Excellence
Phone: (979) 845-6677
Email: ilepse@teex.tamu.edu

HAZ001 – NFPA 1072 Hazardous Materials Awareness & Operations Training

This non-certification course meets or exceeds the National Fire Protection Association (NFPA) 1072 Hazardous Materials / WMD Emergency Response Personnel Professional QualificationsChapter 4, “Awareness,” Chapter 5, “Operations,” Chapter 6.2, “Personal Protective Equipment,” and Code of Federal Regulations (CFR) 1910.120 (q)(6)(i) and (q)(6)(ii) for Awareness and Operations-Level Personnel.

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ002 – Hazardous Materials Emergency Response Technician Training

This non-certification course meets or exceeds the National Fire Protection Association (NFPA) 1072 Hazardous Materials / WMD Emergency Response Personnel Professional Qualifications Chapter 4, “Awareness”, Chapter 5, “Operations,” and Chapter 7, “Hazardous Materials Technician,” and Code of Federal Regulations (CFR) 1910.120 (q)(6)(i), (q)(6)(ii) and (q)(6)(iii) for Awareness-, Operations-, and Technician-level personnel.

This course does not meet the requirements of the 80-Hour Hazardous Materials Technician required by the Texas Commission on Fire Protection (TCFP). TEEX offers an 80 hour Hazardous Materials Technician course that meets the TCFP requirements.

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ004 – Hazardous Materials Refresher Training

This course utilizes both classroom lecture and field activities to meet or exceed Code of Federal Regulations (CFR) 1910.120 (q)(8)(i) annual refresher training requirements. 

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ013 – NFPA 1072 Hazardous Materials Awareness Training

This course meets the National Fire Protection Association (NFPA) 1072 Hazardous Materials / WMD Emergency Response Personnel Professional Qualifications Chapter 4, “Awareness” and Code of Federal Regulations (CFR) 1910.120 (q)(6)(i) for Awareness-level personnel.

Upon completion of this course you are eligible to take the National Board on Fire Service Professional Qualifications (Pro Board) written exam.

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ014 – NFPA 1072 Hazardous Materials Operations Training

This course utilizes both classroom lecture and field exercises to meet or exceed the National Fire Protection Association (NFPA) 1072 Hazardous Materials / WMD Emergency Response Personnel Professional Qualifications Chapter 5, “Operations” and Chapter 6.2, “Personal Protective Equipment,” and Code of Federal Regulations (CFR) 1910.120 (q)(6)(ii) for Operations-level personnel.

Upon completion of this course you are eligible to take the National Board on Fire Service Professional Qualifications (Pro Board) written exam and skills testing.

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ016 – Hazardous Materials Awareness Training

This non-certification course meets the National Fire Protection Association (NFPA) 1072 Hazardous Materials / WMD Emergency Response Personnel Professional Qualifications Chapter 4, “Awareness” and Code of Federal Regulations (CFR) 1910.120 (q)(6)(i) for Awareness-level personnel.

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ017 – Hazardous Materials First Responder Operations Training

This non-certification course utilizes both classroom and field exercises to meet or exceed the National Fire Protection Association (NFPA) 1072 Hazardous Materials / WMD Emergency Response Personnel Professional Qualifications Chapter 5, “Operations” and Chapter 6.2, “Personal Protective Equipment,” and Code of Federal Regulations (CFR) 1910.120 (q)(6)(ii) for Operations-level personnel.

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ019 – Hazardous Materials Technician Training

This non-certification course meets or exceeds the National Fire Protection Association (NFPA) 1072 Hazardous Materials / WMD Emergency Response Personnel Professional Qualifications Chapter 7, “Hazardous Materials Technicians” and Code of Federal Regulations (CFR) 1910.120 (q)(6)(iii) for Technician-level personnel.

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ020 – NFPA 1072 Hazardous Materials Technician Training

This course meets or exceeds the qualifications for National Fire Protection Association (NFPA) 1072 Hazardous Materials / WMD Emergency Response Personnel Professional Qualifications Chapter 7, “Hazardous Materials Technician,” and Code of Federal Regulations (CFR) 1910.120 (q)(6)(iii) for Technician-level personnel.

Upon completion of this course you are eligible to take the National Board on Fire Service Professional Qualifications (Pro Board) written exam and skills testing.

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ025 – TCFP 80 Hour Hazardous Materials Technician Training

This course meets or exceeds the qualifications for National Fire Protection Association (NFPA) 1072 Standard for Hazardous Materials/Weapons of Mass Destruction Emergency Response Personnel Professional Qualifications Chapter 7, “Hazardous Materials Technicians,” and Code of Federal Regulations (CFR) 1910.120 (q)(6)(iii) for Technician-level personnel.

This course is designed to provide you with the basic skill set needed to satisfy the Texas Commission on Fire Protection (TCFP) minimum requirements for a State Certified Hazardous Material Technician. All Skills Testing is conducted during the second week of training. After completion of the class, you will need to contact TCFP to schedule written testing.

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ030 – Hazardous Materials Product Control Training

This non-certification course meets or exceeds the National Fire Protection Association (NFPA) 1072 Hazardous Materials / WMD Emergency Response Personnel Professional Qualifications Chapter 6.6, “Product Control,” for operations-level personnel.

You will engage in practical, hands-on defensive product control action options that include diking, retention, absorption, diversion, and vapor suppression.

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ031 – NFPA 1072 Hazardous Materials Product Control Training

This course meets or exceeds the National Fire Protection Association (NFPA) 1072 Hazardous Materials / WMD Emergency Response Personnel Professional Qualifications Chapter 6.6, “Product Control,” for operations-level personnel. You will engage in practical, hands-on defensive product control action options that include diking, retention, absorption, diversion, and vapor suppression.

Upon completion of this course you are eligible to take the National Board on Fire Service Professional Qualifications (Pro Board) written exam and skills testing.

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ032 – Air Monitoring For Hazardous Materials/Operations Mission Specific Training

This non-certification course meets or exceeds the National Fire Protection Association (NFPA) 1072 Hazardous Materials / WMD Emergency Response Personnel Professional Qualifications Chapter 6.7, “Detection, Monitoring, and Sampling.”

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ033 – NFPA 1072 Air Monitoring For Hazardous Materials/Operations Mission Specific

This course meets or exceeds the National Fire Protection Association (NFPA) 1072 Hazardous Materials / WMD Emergency Response Personnel Professional Qualifications Chapter 6.7, “Detection, Monitoring, and Sampling.”

Upon completion of this course you are eligible to take the National Board on Fire Service Professional Qualifications (Pro Board) written exam and skills testing.

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ037 – NFPA 1072 Hazardous Materials Mission-Specific Decontamination

This course utilizes both classroom lecture and field exercises to meet or exceed the National Fire Protection Association (NFPA) 1072 Hazardous Materials / WMD Emergency Response Personnel Professional QualificationsChapter 6.3 “Mass Decontamination” and Chapter 6.4 “Technical Decontamination” and Code of Federal Regulations (CFR) 1910.120(k) for Decontamination procedures.

Upon completion of this course you are eligible to take the National Board on Fire Service Professional Qualifications (Pro Board) written exam and skills testing and obtain two separate certifications for Chapter 6.3 and Chapter 6.4.

Full course information and schedule

Contact Information

Nicholas Hickson
Training Manager
Phone: (979) 458-3640
Email: Nicholas.Hickson@teex.tamu.edu

HAZ101 – Hazardous Materials Awareness, Operations, PPE and Product Control

This course utilizes both classroom lecture and field exercises
to meet or exceed the National Fire Protection Association (NFPA) 1072 Hazardous
Materials / WMD Emergency Response Personnel Professional Qualifications Chapter
4, “Awareness”, Chapter 5, “Operations”, Chapter 6.2, “Personal Protective
Equipment,” and Chapter 6.6 “Product Control” and Code of Federal Regulations (CFR) 1910.120 (q)(6)(i)(ii) for
Awareness and Operations-level personnel. Upon completion of this course you
are eligible to take the National Board on Fire Service Professional
Qualifications (Pro Board) written exam and skills testing.

Full course information and schedule

Contact Information

Nick Hickson
Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ507 – Illicit Laboratory Awareness Training

This course focuses on the initial response to a possible Illicit Chemical, Biological or Drug Laboratory. In addition, this course covers the recognition and identification of these labs, their unique hazards, and possible response options.

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ701 – NFPA 1072 Online Awareness and Operations

This online course focuses on training responders to meet the requirements established in the National Fire Protection Association (NFPA)
1072 (2017 ed.), Competencies for Awareness Level Personnel,” (chapter 4) and the Occupational Safety and Health Administration (OSHA) 29 Code of Federal Regulations (CFR) 1910.120 (q) (6) (i) (a-f) “First Responder Awareness Level” competencies.

In addition, this course meets the NFPA 1072 Hazardous Materials / WMD Emergency Response Personnel Professional Qualifications Chapter 4, “Awareness” and Code of Federal Regulations (CFR) 1910.120 (q)(6)(i) for
Awareness-level personnel.

This course also meets or exceeds the NFPA 1072 Hazardous Materials / WMD Emergency Response Personnel Professional Qualifications Chapter 5, “Operations” minus chapters 5.4 and 5.5 which are completed in the hands on HAZ702 completer class.

Upon completion of this course you are eligible to complete HAZ702 (the skills portion) and take the National Board on Fire Service Professional Qualifications (Pro Board) written exam and skills testing.

Full course information and schedule

Contact Information

Nicholas Hickson
Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ702 – NFPA 1072 Hazardous Materials Awareness & Operations Skills

This course meets or exceed the National Fire Protection Association (NFPA) 1072 Hazardous Materials / WMD Emergency Response Personnel Professional Qualifications Chapter 5.4 and 5.5 and is used as the completion of the online HAZ701 class.

Upon completion of this course you are eligible to take the National Board on Fire Service Professional Qualifications (Pro Board) written exam and skills testing for Hazmat Awareness and Operations.

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ036 – Chemistry for Emergency Response

This 10-day course is designed to prepare responders to function safely at the scene of a Hazardous Materials (HazMat) incident by understanding the potential hazards. This is accomplished by gaining recognition of chemical nomenclature and basic principles of chemistry in order to assess risks to responders and the public.

Problem-solving sessions and interactive discussion cover topics such as salts and inorganic nonsalts, hydrocarbons, hydrocarbon derivatives, and hydrocarbon radicals. Applying the science of chemistry to thermodynamics, volatility, and combustion provides real-world examples.

An understanding of basic chemistry is helpful to receive maximum benefit from the course.

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ896 – Procedimientos de Desinfección en Áreas Comunes

Al finalizar esta capacitación en línea el estudiante estará en la capacidad de identificar algunos de los conceptos básicos de desinfección y el uso apropiado de los desinfectantes, siguiendo patrones seguros de aplicación para reducir los niveles de exposición a microorganismos y agentes patógenos en sus respectivas comunidades.

Esta sesión grabada de capacitación estará misponible para accesar en cualquier momento requerido desde la plataforma digital de TEEX.

Esta clase en particular hace especial énfasis en profuctos de desinfección regulados para SARS-CoV-2 (COVID-19)

Full course information and schedule

Contact Information

Nicholas Hickson
Training Manager
Phone: (979) 458-3640
Email: Nicholas.Hickson@teex.tamu.edu

HAZ897 – Disinfecting Procedures for Facilities

With this online class the students will be able to identify some of the basic concepts for disinfection and use the appropriate disinfectant while following safety guidelines and providing a reduction of the level of pathogens exposures in their communities; as a recorded session this class will be available anytime on the TEEX website.

This class makes special emphasis in SARS-CoV-2 (COVID-19) rated disinfectants and proper uses.

Full course information and schedule

Contact Information

Nicholas Hickson
Training Manager
Phone: (979) 458-3640
Email: Nicholas.Hickson@teex.tamu.edu

OGT208 – Standardized Awareness Training (AWR-160-SAT)

This course takes an all-hazards approach to Hazardous Materials (HazMat) incidents, including acts of terrorism where Weapons of Mass Destruction (WMD) materials may have been used. It provides participants the knowledge to recognize the hazardous material, protect themselves, notify others, and secure the scene. 

Full course information and schedule

Contact Information

Michael Geesling
Training Manager
Phone: (979) 458-3401
Email: michael.geesling@teex.tamu.edu

PER212 – Operational Level Response to HazMat/WMD Incidents

This course provides the knowledge and skills needed to obtain certification through the National Professional Qualifications System (NPQS/Pro Board) as an Operations-level responder.

This three-day course focuses on the unique response and personal protection challenges that responders face during a Weapons of Mass Destruction (WMD)/terrorist incident or a Hazardous Materials (HazMat) incident. The Operations-level training prepares emergency responders from all disciplines to recognize and identify hazardous material and to mitigate a HazMat incident by preventing further contamination of people, property, and the environment. Participants will have the opportunity to Pro Board test on day three.

PER212 is based on National Fire Protection Association (NFPA) 472 (2008 ed.) consensus standard Operations-level core competencies (Chapter 5 Core Ops) and Personal Protective Equipment (PPE) Chapter 6.2, mission-specific competency, as well as Occupational Safety and Health Administration (OSHA) 29 Code of Federal Regulations (CFR) 1910.120 and Environmental Protection Agency (EPA) (40 CFR Part 311) response regulations.

Full course information and schedule

Contact Information

Michael Geesling
Training Director
Phone: (979) 458-3401
Email: michael.geesling@teex.tamu.edu

ASP231 – Advanced Hazardous Material Response

This class is for the hazardous materials responder that wants to take their skills to the next level through a non-certification scenario-based format. This week will challenge your past training at a technician or specialist level. Come prepared to use your leadership skills, diverse knowledge of chemicals, remediation skills, and decontamination techniques. Students will use both cognitive and hands–on skills to successfully mitigate a series of hazardous materials scenarios. By the end of the course, students will be able to identify hazards, incorporate air monitoring to develop the hot warm, and cold zones; demonstrate and explain the different types of decontamination processes; and describe the required medical management of patients involved in hazardous materials incident.

Full course information and schedule

Contact Information

Customer Service

Phone: (866) 878-8900
Email: annualschool@teex.tamu.edu

FSA101 – Forensic Photography I

Capturing evidence and documenting the crime scene through skilled photography techniques is crucial to a proper criminal investigation. This course will address the basic concepts of photography and their application to professional crime scene documentation. Course instruction will be through lecture, case review, and practical exercises.

This course meets Texas Commission on Law Enforcement (TCOLE) requirements Texas Forensic Science Academy Forensic Photography Course #40053.

Participant Testimonials:

• “I feel much more comfortable and confident with my camera and the knowledge I’ve obtained will help tremendously in the field.“
• “I knew nothing of the camera I came in with other than to shoot in ‘auto’ mode. I can now use the camera correctly and efficiently.“

Full course information and schedule

Contact Information

Institute for Law Enforcement and Protective Services Excellence
Phone: (979) 845-6677
Email: ilepse@teex.tamu.edu

FSA116 – Foundations of Forensic Photography

Photography is a critical element in the documentation of criminal investigations. This course addresses the basic concepts of photography and their application to professional investigative documentation. For the final project, participants have the opportunity to capture photographs at a simulated crime scene, acting in the traditional role of an investigator for the case.

This course meets Texas Commission on Law Enforcement (TCOLE) requirements for Texas Forensic Science Academy Foundations of Forensic Photography course #667369.

Full course information and schedule

Contact Information

Institute for Law Enforcement and Protective Services Excellence
Phone: (979) 845-6677
Email: ilepse@teex.tamu.edu

HAZ001 – NFPA 1072 Hazardous Materials Awareness & Operations Training

This non-certification course meets or exceeds the National Fire Protection Association (NFPA) 1072 Hazardous Materials / WMD Emergency Response Personnel Professional QualificationsChapter 4, “Awareness,” Chapter 5, “Operations,” Chapter 6.2, “Personal Protective Equipment,” and Code of Federal Regulations (CFR) 1910.120 (q)(6)(i) and (q)(6)(ii) for Awareness and Operations-Level Personnel.

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ002 – Hazardous Materials Emergency Response Technician Training

This non-certification course meets or exceeds the National Fire Protection Association (NFPA) 1072 Hazardous Materials / WMD Emergency Response Personnel Professional Qualifications Chapter 4, “Awareness”, Chapter 5, “Operations,” and Chapter 7, “Hazardous Materials Technician,” and Code of Federal Regulations (CFR) 1910.120 (q)(6)(i), (q)(6)(ii) and (q)(6)(iii) for Awareness-, Operations-, and Technician-level personnel.

This course does not meet the requirements of the 80-Hour Hazardous Materials Technician required by the Texas Commission on Fire Protection (TCFP). TEEX offers an 80 hour Hazardous Materials Technician course that meets the TCFP requirements.

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ004 – Hazardous Materials Refresher Training

This course utilizes both classroom lecture and field activities to meet or exceed Code of Federal Regulations (CFR) 1910.120 (q)(8)(i) annual refresher training requirements. 

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ016 – Hazardous Materials Awareness Training

This non-certification course meets the National Fire Protection Association (NFPA) 1072 Hazardous Materials / WMD Emergency Response Personnel Professional Qualifications Chapter 4, “Awareness” and Code of Federal Regulations (CFR) 1910.120 (q)(6)(i) for Awareness-level personnel.

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ017 – Hazardous Materials First Responder Operations Training

This non-certification course utilizes both classroom and field exercises to meet or exceed the National Fire Protection Association (NFPA) 1072 Hazardous Materials / WMD Emergency Response Personnel Professional Qualifications Chapter 5, “Operations” and Chapter 6.2, “Personal Protective Equipment,” and Code of Federal Regulations (CFR) 1910.120 (q)(6)(ii) for Operations-level personnel.

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ019 – Hazardous Materials Technician Training

This non-certification course meets or exceeds the National Fire Protection Association (NFPA) 1072 Hazardous Materials / WMD Emergency Response Personnel Professional Qualifications Chapter 7, “Hazardous Materials Technicians” and Code of Federal Regulations (CFR) 1910.120 (q)(6)(iii) for Technician-level personnel.

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ020 – NFPA 1072 Hazardous Materials Technician Training

This course meets or exceeds the qualifications for National Fire Protection Association (NFPA) 1072 Hazardous Materials / WMD Emergency Response Personnel Professional Qualifications Chapter 7, “Hazardous Materials Technician,” and Code of Federal Regulations (CFR) 1910.120 (q)(6)(iii) for Technician-level personnel.

Upon completion of this course you are eligible to take the National Board on Fire Service Professional Qualifications (Pro Board) written exam and skills testing.

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ029 – NFPA 472 Hazardous Materials Transportation Specialist Training

This course meets or exceeds the qualifications for National Fire Protection Association (NFPA) 472 Standard for Competence of Responders to Hazardous Materials/Weapons of Mass Destruction Incidents Chapters 12, 13, and 14 which train specialists to respond to tank car, cargo tank, and intermodal tank incidents.

Upon completion of this course students are eligible to take the National Board on Fire Service Professional Qualifications (Pro Board) written exam and skills testing.

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ037 – NFPA 1072 Hazardous Materials Mission-Specific Decontamination

This course utilizes both classroom lecture and field exercises to meet or exceed the National Fire Protection Association (NFPA) 1072 Hazardous Materials / WMD Emergency Response Personnel Professional QualificationsChapter 6.3 “Mass Decontamination” and Chapter 6.4 “Technical Decontamination” and Code of Federal Regulations (CFR) 1910.120(k) for Decontamination procedures.

Upon completion of this course you are eligible to take the National Board on Fire Service Professional Qualifications (Pro Board) written exam and skills testing and obtain two separate certifications for Chapter 6.3 and Chapter 6.4.

Full course information and schedule

Contact Information

Nicholas Hickson
Training Manager
Phone: (979) 458-3640
Email: Nicholas.Hickson@teex.tamu.edu

IMS250 – Industrial Incident Management Team-Initial Response Phase & Tabletop Exercise

This course focuses on developing a team approach to industrial incident management in a fixed facility and/or operating region.  Emphasis is placed on the formation and duties of the Industrial Incident Management Team (IMT) during the initial response phase of an incident and can be customized, as desired.  The functions of Command, Command Staff, and General Staff, working on-scene and in an industrial Emergency Operations Center (EOC) environment, are stressed.  Further, specific emphasis is placed on establishing, managing, and supporting the Operations Section.

The course reviews IMT section and position-specific roles and responsibilities during the initial response phase including the creation of the ICS 201-Incident Briefing Form and the execution of the ICS 201 Incident Brief.

Full course information and schedule

Contact Information

Preparedness Program

Phone: (979) 458-5645
Email: preparedness@teex.tamu.edu

IMS350 – Industrial Incident Management Team – Expanded Response Phase

The course focuses on developing a team approach to industrial incident management in a fixed facility and/or operating region.  The course emphasizes the duties of the Industrial Incident Management Team (IMT) during the transition from the initial response phase to the expanded response phase.  And, throughout the expanded response phase until incident termination.   The course will utilize a customized, hypothetical incident scenario, that each client may experience at their facility/operating region, for training purposes.

The functions of Incident Command/Unified Command, Command Staff, and the General Staff, working on-scene and in an industrial Emergency Operations Center (EOC) environment, are stressed.  Participants will “role-play” their IMT position-specific duties and responsibilities during the course’s hypothetical scenario while being coached by TEEX Instructors.

Finally, the course includes completion of an entire Expanded Response Planning Cycle and the execution of each Planning Process Meeting.  As a result, the IMT participants will create a written Incident Action Plan (IAP), and supporting documents, specific to the hypothetical incident scenario.

Full course information and schedule

Contact Information

Emergency Services Training Institute
Phone: (979) 845-7641
Email: esti@teex.tamu.edu

LNG105 – LNG Workshop #1 – Production, Usage and Safety Overview

The Liquefied Natural Gas (LNG) Workshop 1: Production, Usage and Safety, live Zoom, provides you with an introduction to what LNG is, how it is made, what it’s common uses are, and how safe of a product it is in comparison to other hydrocarbons. This is a live online instructor-led training that provides for an interactive discussion and allows questions and answers as the information is presented.

Full course information and schedule

Contact Information

Kirk Richardson
Training Director
Phone: (979) 845-1158
Email: kirk.richardson@teex.tamu.edu

LNG106 – LNG Workshop #2 – Properties, Characteristics and Considerations of LNG

The Liquefied Natural Gas (LNG) Workshop 2: Properties, Characteristics and Considerations, live Zoom, provides you with an in-depth discussion on the properties and characteristics of LNG. We will also examine special considerations specific to LNG, such as Rapid Phase Transitions, cryogenic concerns, and explosion potential. This is a live online instructor-led training that provides for an interactive discussion and allows questions and answers as the information is presented.

Full course information and schedule

Contact Information

Kirk Richardson
Training Director
Phone: (979) 845-1158
Email: kirk.richardson@teex.tamu.edu

LNG107 – LNG Workshop #3 – Storage and Transportation Container Design

The Liquified Natural Gas (LNG) Workshop #3: LNG Transportation and Storage Containers, live Zoom, provides you with a discussion on the design of containers used for storage and transportation of LNG. We will identify construction material and design of the different containers as well as some of the safety systems in place to prevent over pressure or provide leak control. This is a live online instructor-led training that provides for an interactive discussion and allows questions and answers as the information is presented.

Full course information and schedule

Contact Information

Kirk Richardson
Training Director
Phone: (979) 845-1158
Email: Kirk.Richardson@teex.tamu.edu

LNG108 – LNG Workshop #4 – Incident Control

This Liquefied Natural Gas (LNG) Workshop #4: Incident Control, live webinar, provides you with an in-depth discussion on the appropriate tactics applied towards controlling and extinguishment of a LNG incident. We will also examine passive and active fire protection within LNG facilities and identify how they may be used outside of facilities as well. This is a live online instructor-led training that provides for an interactive discussion and allows questions and answers as the information is presented.

Full course information and schedule

Contact Information

Kirk Richardson
Training Director
Phone: (979) 845-1158
Email: kirk.richardson@teex.tamu.edu

ASP464 – Operaciones de Desechos Peligrosos y Respuesta de Emergencia: Hazwoper Nivel T

Descripción

Este curso está diseñado, para proveer del conocimiento y habilidades requeridos para la certificación del nivel Técnico de Materiales Peligrosos para el manejo de Residuos Peligrosos durante operaciones Hazwoper (Operaciones de Desechos Peligrosos y Respuestas de Emergencia). El curso entrega metodología, que consiste en capacitación formal, discusiones y debates de grupos, conferencias especializadas, actividades del participante y aplicaciones orientadas a las tareas en simulaciones de mesa y ejercicios de campo.

This course is designed to provide the knowledge and skills required for certification of the Technical level of Hazardous Materials for Hazardous Waste Management during Hazwoper Operations (Dangerous Waste Operations and Responses Emergency). The course delivers methodology, consisting of formal training, group discussions and debates, specialized conferences, participant activities and task-oriented applications in table simulations and field exercises.

Full course information and schedule

Contact Information

Customer Service
Datos de contacto
Phone: (866) 878-8900
Email: annualschool@teex.tamu.edu

HAZ005 – Hazwoper for Clean-Up Operations Training

This course provides awareness of potential hazards encountered at hazardous waste cleanup operations, as well as focusing on the purpose and limitations of safety equipment.

This course is designed to meet Hazardous Waste Operations and Emergency Response (HAZWOPER) requirements of [MS1] Code of Federal Regulations (CFR) 1910.120 (e) for employees responsible for hazardous waste cleanup operations.

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ006 – Hazwoper Refresher for Clean-Up Operations Training

This course utilizes both classroom lecture and field activities required to maintain competencies as Hazardous Waste Operations and Emergency Response (HAZWOPER) General or Occasional Site Workers. It is designed to meet or exceed Code of Federal Regulations (CFR) 1910.120 (e)(8) annual refresher training requirements. 

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ896 – Procedimientos de Desinfección en Áreas Comunes

Al finalizar esta capacitación en línea el estudiante estará en la capacidad de identificar algunos de los conceptos básicos de desinfección y el uso apropiado de los desinfectantes, siguiendo patrones seguros de aplicación para reducir los niveles de exposición a microorganismos y agentes patógenos en sus respectivas comunidades.

Esta sesión grabada de capacitación estará misponible para accesar en cualquier momento requerido desde la plataforma digital de TEEX.

Esta clase en particular hace especial énfasis en profuctos de desinfección regulados para SARS-CoV-2 (COVID-19)

Full course information and schedule

Contact Information

Nicholas Hickson
Training Manager
Phone: (979) 458-3640
Email: Nicholas.Hickson@teex.tamu.edu

HAZ897 – Disinfecting Procedures for Facilities

With this online class the students will be able to identify some of the basic concepts for disinfection and use the appropriate disinfectant while following safety guidelines and providing a reduction of the level of pathogens exposures in their communities; as a recorded session this class will be available anytime on the TEEX website.

This class makes special emphasis in SARS-CoV-2 (COVID-19) rated disinfectants and proper uses.

Full course information and schedule

Contact Information

Nicholas Hickson
Training Manager
Phone: (979) 458-3640
Email: Nicholas.Hickson@teex.tamu.edu

OSH201 – Hazardous Materials (OSHA #2015)

The Hazardous Materials (OSHA #2015) course covers OSHA General Industry Standards and other consensus and proprietary standards that relate to the use of hazardous materials. Course topics include flammable and combustible liquids, compressed gases, LP-gases, and cryogenic liquids. Related processes such as spraying and dipping, and use of electrical equipment in hazardous locations are also discussed. Upon course completion, students will have the ability to assess compliance with OSHA hazardous materials standards, determine hazardous (classified) locations, and proper moving, storing, and handling of hazardous materials.

Full course information and schedule

Contact Information

Infrastructure Training & Safety Institute
OSHA Training Institute Education Center
Phone:
Email: itsi@teex.tamu.edu

ASP462 – Sistema de Comando de Incidentes en operaciones con materiales peligrosos

Establecer el Sistema de Comando de Incidentes (ICS). Establecer los insumos básicos así como las estrategias para la planificación de respuesta a emergencias en industrias, almacenamiento, manipulación y contingencias en carretera o urbanas con materiales peligrosos.

Full course information and schedule

Contact Information

Customer Service
Datos de contacto
Phone: (866) 878-8900
Email: annualschool@teex.tamu.edu

HAZ007 – Hazardous Materials Incident Command Training

This course meets or exceeds the National Fire Protection Association (NFPA) 1072 Hazardous Materials / WMD Emergency Response Personnel Professional Qualifications Chapter 8, “Incident Commander” and Code of Federal Regulations (CFR) 1910.120 (q)(6)(iv) for Incident Command-level personnel.

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ008 – NFPA 1072 Hazardous Materials Incident Command Training

This course meets or exceeds the National Fire Protection Association (NFPA) 1072 Hazardous Materials / WMD Emergency Response Personnel Professional Qualifications  Chapter 8, “Incident Commander” and Code of Federal Regulations 29 CFR 1910.120 (q)(6)(v) for Incident Command-level personnel.

Upon completion of this course you are eligible to take the National Board on Fire Service Professional Qualifications (Pro Board) written exam and skills testing.

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

IMS250 – Industrial Incident Management Team-Initial Response Phase & Tabletop Exercise

This course focuses on developing a team approach to industrial incident management in a fixed facility and/or operating region.  Emphasis is placed on the formation and duties of the Industrial Incident Management Team (IMT) during the initial response phase of an incident and can be customized, as desired.  The functions of Command, Command Staff, and General Staff, working on-scene and in an industrial Emergency Operations Center (EOC) environment, are stressed.  Further, specific emphasis is placed on establishing, managing, and supporting the Operations Section.

The course reviews IMT section and position-specific roles and responsibilities during the initial response phase including the creation of the ICS 201-Incident Briefing Form and the execution of the ICS 201 Incident Brief.

Full course information and schedule

Contact Information

Preparedness Program

Phone: (979) 458-5645
Email: preparedness@teex.tamu.edu

IMS313 – Incident Management/Unified Command for All-Hazards Expanding and Complex Inci

This course provides specific emphasis on Incident Action Plan (IAP) preparation and resource management processes when responding to an expanding incident.

The course includes facilitated discussions with subject-matter experts in which each of the fundamental ICS planning and resource management concepts are examined. You will immediately apply newly-gained knowledge and concepts through scenario-based activities customized to your community.

Full course information and schedule

Contact Information

Preparedness Program

Phone: (979) 458-5645
Email: preparedness@teex.tamu.edu

IMS320 – 200-FEMA Incident Command System for Single Resources & Initial Action

IMS320 provides training and resources for personnel who require application of the Incident Command System (ICS). The course is designed to enhance your Incident command skills and focuses on new concepts of the ICS.

The course allows you to participate in group activities that introduce the development of the Incident Action Plan (IAP) and demonstrate the interactions between the Command and General Staff sections of the ICS.

This course assists any person with a responsibility to function in a command post that is managing an expanding incident. This course builds upon information covered in the ICS-100 course.

Full course information and schedule

Contact Information

Preparedness Program

Phone: (979) 458-5645
Email: preparedness@teex.tamu.edu

IMS344 – Advanced Incident Management / Unified Command (ICS 400)

This course trains emergency response supervisors and mid-to-upper-level managers in the skills necessary to effectively plan for and manage a large-scale incident by applying and implementing an all-hazards, multi-disciplinary, command and management team approach. The course places specific emphasis on Incident Action Plan (IAP) development and resource management processes.

The course concludes with a practical application role-play exercise customized to the community in which the course is delivered.

Full course information and schedule

Contact Information

George Glenn
Training Manager
Phone: (979) 458-3537
Email: George.Glenn@teex.tamu.edu

IMS350 – Industrial Incident Management Team – Expanded Response Phase

The course focuses on developing a team approach to industrial incident management in a fixed facility and/or operating region.  The course emphasizes the duties of the Industrial Incident Management Team (IMT) during the transition from the initial response phase to the expanded response phase.  And, throughout the expanded response phase until incident termination.   The course will utilize a customized, hypothetical incident scenario, that each client may experience at their facility/operating region, for training purposes.

The functions of Incident Command/Unified Command, Command Staff, and the General Staff, working on-scene and in an industrial Emergency Operations Center (EOC) environment, are stressed.  Participants will “role-play” their IMT position-specific duties and responsibilities during the course’s hypothetical scenario while being coached by TEEX Instructors.

Finally, the course includes completion of an entire Expanded Response Planning Cycle and the execution of each Planning Process Meeting.  As a result, the IMT participants will create a written Incident Action Plan (IAP), and supporting documents, specific to the hypothetical incident scenario.

Full course information and schedule

Contact Information

Emergency Services Training Institute
Phone: (979) 845-7641
Email: esti@teex.tamu.edu

IMS661 – Incident Management for Industrial On-Scene Commanders Level I

Upon the successful completion of this course, participants will be able to successfully lead the initial incident response to an industrial incident. Course delivery consists of small-group discussion, large-group discussion, individual activities, and group activities that includes the use of virtual reality simulation. 

Full course information and schedule

Contact Information

Preparedness Program

Phone: (979) 458-5645
Email: preparedness@teex.tamu.edu

IMS662 – Incident Management for Industrial On-Scene Commanders Level II

Upon the successful completion of this course, participants will be able to successfully lead the initial incident response to an expanding industrial incident. This course also addresses the strategic and tactical response issues needed to slow the expansion of an industrial incident. Course delivery consists of small-group discussion, large-group discussion, individual activities, and group activities that includes the use of virtual reality simulation.

Full course information and schedule

Contact Information

Preparedness Program

Phone: (979) 458-5645
Email: preparedness@teex.tamu.edu

IMS663 – Incident Management for Industrial On-Scene Commanders Level III

Upon the successful completion of this course, participants will be able to successfully lead an incident response to a large-scale industrial incident. and be better able to transition into the expanded (proactive) response phase, as well. This advanced course also addresses decision-making and the strategic and tactical response issues needed in response to a large-scale industrial incident. Course delivery consists of small-group discussion, large-group discussion, individual activities, and group activities that includes the use of a virtual reality simulation. 

Full course information and schedule

Contact Information

Preparedness Program

Phone: (979) 458-5645
Email: preparedness@teex.tamu.edu

IMS664 – Incident Management for Industrial On-Scene Commanders Level IV

Upon the successful completion of this course, participants will be able to operate as part of a high performance team to manage the incident response to a large scale, complex, industrial emergency. 

Full course information and schedule

Contact Information

Preparedness Program

Phone: (979) 458-5645
Email: preparedness@teex.tamu.edu

MGT904 – Intermediate ICS for Expanding Incidents

Building on the prerequisite ICS 100 and ICS 200 courses, this ICS 300 course focuses on the Incident Command System (ICS) for supervisors in expanding incidents. ICS 300 outlines how the NIMS Command and Coordination component supports the management of expanding incidents as well as describes the incident management processes as prescribed by ICS. This course has a threaded activity that will give students the opportunity to practice implementing the incident management process and creating an Incident Action Plan (IAP) for a simulated expanding incident.

Full course information and schedule

Contact Information

George Glenn
Program Manager
Phone: (979) 500-6773
Email: george.glenn@teex.tamu.edu

MGT905 – Advanced ICS-400 Command and General Staff-Complex Incidents

ICS 400 is intended for an audience of experienced responders and other senior emergency management personnel who may perform in a management capacity for major or complex incidents (Type 1 or Type 2 incidents). Large and complex incidents that require the application of area command don’t happen often. Although this is an advanced ICS course, it is not intended to develop mastery of area command. The purpose of this course is to expose students to the concepts of utilizing area command in major and complex incidents.

Full course information and schedule

Contact Information

George Glenn
Training Manager
Phone: (979) 500-6773
Email: george.glenn@teex.tamu.edu

ASP205 – Advanced Bulk Storage Emergency Responder

Advanced Bulk Storage Response is a hands-on course
designed to provide emergency responders with the skills and knowledge to
mitigate a flammable liquid fire involving bulk storage. This five-day course is designed
to expand the knowledge and skills for emergency responders, tank farm
operators, and bulk-storage and containers facility supervisors/managers when
responding to and successfully mitigating large atmospheric storage-tank
emergencies.  The course will combine classroom lecture and small group activities
with field observation and hands-on skill practice, utilizing live-fire
simulations of bulk-storage emergencies.  The course will conclude with a
capstone live-fire field response to the largest atmospheric storage tank fire
prop in North America. 

Full course information and schedule

Contact Information

Customer Service

Phone: (866) 878-8900
Email: annualschool@teex.tamu.edu

HAZ009 – HazMat Pipeline Awareness Training

This course addresses regulatory pipeline safety and prevention subject matter. In addition, you will complete exercises using the Emergency Response Guidebook (ERG) and Material Safety Data Sheets (MSDS).

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ021 – HazMat Pipeline Operations Training

This course covers both gas and liquid pipeline operations, including terminology, pipeline equipment, pipeline operations, and the unique hazards of pipeline transportation.

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ023 – Hazardous Materials Pipeline Emergency Response Technician Training

This course incorporates both classroom and hands-on exercises utilizing the 2,300 foot underground pipeline and above-ground training props. This course includes awareness, operations, and emergency response objectives for pipeline emergencies.

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

IMS250 – Industrial Incident Management Team-Initial Response Phase & Tabletop Exercise

This course focuses on developing a team approach to industrial incident management in a fixed facility and/or operating region.  Emphasis is placed on the formation and duties of the Industrial Incident Management Team (IMT) during the initial response phase of an incident and can be customized, as desired.  The functions of Command, Command Staff, and General Staff, working on-scene and in an industrial Emergency Operations Center (EOC) environment, are stressed.  Further, specific emphasis is placed on establishing, managing, and supporting the Operations Section.

The course reviews IMT section and position-specific roles and responsibilities during the initial response phase including the creation of the ICS 201-Incident Briefing Form and the execution of the ICS 201 Incident Brief.

Full course information and schedule

Contact Information

Preparedness Program

Phone: (979) 458-5645
Email: preparedness@teex.tamu.edu

IMS350 – Industrial Incident Management Team – Expanded Response Phase

The course focuses on developing a team approach to industrial incident management in a fixed facility and/or operating region.  The course emphasizes the duties of the Industrial Incident Management Team (IMT) during the transition from the initial response phase to the expanded response phase.  And, throughout the expanded response phase until incident termination.   The course will utilize a customized, hypothetical incident scenario, that each client may experience at their facility/operating region, for training purposes.

The functions of Incident Command/Unified Command, Command Staff, and the General Staff, working on-scene and in an industrial Emergency Operations Center (EOC) environment, are stressed.  Participants will “role-play” their IMT position-specific duties and responsibilities during the course’s hypothetical scenario while being coached by TEEX Instructors.

Finally, the course includes completion of an entire Expanded Response Planning Cycle and the execution of each Planning Process Meeting.  As a result, the IMT participants will create a written Incident Action Plan (IAP), and supporting documents, specific to the hypothetical incident scenario.

Full course information and schedule

Contact Information

Emergency Services Training Institute
Phone: (979) 845-7641
Email: esti@teex.tamu.edu

OIL100 – Oil Spills: Tactical and Operations Level

This 40-hour course utilizes classroom discussion, multimedia presentations, and practical hands-on exercises to provide you with essential information and training needed to effectively manage a spill-response operation in estuarine and coastal environments. You will assume leadership roles and direct simulated response operations under the supervision of the instructors.

Full course information and schedule

Contact Information

Kirk Richardson
Training Manager
Phone: (979) 845-1158
Email: kirk.richardson@teex.tamu.edu

OIL112 – Oil Spill Control – Refresher

This 24-hour course provides you with interesting and challenging response scenarios beyond basic response skills for responding to oil spills in estuarine and coastal environments. Classroom time accounts for approximately six hours of training time. The remainder is hands-on field time with emphasis on booming strategy and tactics.

Full course information and schedule

Contact Information

Kirk Richardson
Training Manager
Phone: (979) 845-1158
Email: kirk.richardson@teex.tamu.edu

OIL200 – Freshwater Oil Spill Control – Tactical and Operations Level

This 40-hour course utilizes classroom discussion, multimedia presentations, and practical hands-on exercises to provide you with the essential information and training needed to effectively manage a spill-response operation in rivers, small streams, on land, and sub-surfaces. You will assume leadership roles and direct simulated response operations under the supervision of the instructors.

Full course information and schedule

Contact Information

Kirk Richardson
Training Manager
Phone: (979) 845-1158
Email: kirk.richardson@teex.tamu.edu

OIL212 – Freshwater Oil Spill – Refresher

This 24-hour course provides you with interesting and challenging response scenarios beyond basic response skills for oil spills in rivers and small stream environments. Classroom time accounts for approximately six hours of training time. The remainder is hands-on field time with emphasis on booming strategy and tactics.

Full course information and schedule

Contact Information

Kirk Richardson
Training Manager
Phone: (979) 845-1158
Email: kirk.richardson@teex.tamu.edu

OIL310 – Oil Spill Response Workshop #1 – Initial Response Considerations and Strategie

Students in this live Zoom course will need little to no on water oil spill recovery experience and will be able to see what common pieces of equipment, vessels and strategies that can be used during a spill. Different types of boom and the pros and cons of each type will be discussed. We will also be discussing booming strategies from the shoreline, on water recovery and shallow water strategies. This is a live online instructor-led training that provides for an interactive discussion and allows questions and answers as the information is presented.

Full course information and schedule

Contact Information

Kirk Richardson
Training Director
Phone: (979) 845-1158
Email: kirk.richardson@teex.tamu.edu

OIL320 – Oil Spill Response Worksop #2-Shoreline types, protection, cleanup and restora

Students in this live Zoom course will gain an understanding of the types of shorelines and how each can be differently affected by a spill in a marine environment. We will be discussing how each shoreline is rated in the Environmental Sensitive Index and which one should have priority during a release. Protection, clean up and restoration processes will be discussed and what affects they may have on the environment. This is a live online instructor-led training that provides for an interactive discussion and allows questions and answers as the information is presented.

Full course information and schedule

Contact Information

Kirk Richardson
Training Director
Phone: (979) 845-1158
Email: kirk.richardson@teex.tamu.edu

OIL500 – Customized Oil Spill Response

TEEX can provide your organization with customized oil-spill response training tailored to meet your specific needs. The 8 to 40 hour custom designed curriculum is based upon the topics offered in the standard oil-spill response courses. 

Full course information and schedule

Contact Information

Kirk Richardson
Training Manager
Phone: (979) 845-1158
Email: kirk.richardson@teex.tamu.edu

HAZ009 – HazMat Pipeline Awareness Training

This course addresses regulatory pipeline safety and prevention subject matter. In addition, you will complete exercises using the Emergency Response Guidebook (ERG) and Material Safety Data Sheets (MSDS).

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ021 – HazMat Pipeline Operations Training

This course covers both gas and liquid pipeline operations, including terminology, pipeline equipment, pipeline operations, and the unique hazards of pipeline transportation.

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ023 – Hazardous Materials Pipeline Emergency Response Technician Training

This course incorporates both classroom and hands-on exercises utilizing the 2,300 foot underground pipeline and above-ground training props. This course includes awareness, operations, and emergency response objectives for pipeline emergencies.

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

IMS250 – Industrial Incident Management Team-Initial Response Phase & Tabletop Exercise

This course focuses on developing a team approach to industrial incident management in a fixed facility and/or operating region.  Emphasis is placed on the formation and duties of the Industrial Incident Management Team (IMT) during the initial response phase of an incident and can be customized, as desired.  The functions of Command, Command Staff, and General Staff, working on-scene and in an industrial Emergency Operations Center (EOC) environment, are stressed.  Further, specific emphasis is placed on establishing, managing, and supporting the Operations Section.

The course reviews IMT section and position-specific roles and responsibilities during the initial response phase including the creation of the ICS 201-Incident Briefing Form and the execution of the ICS 201 Incident Brief.

Full course information and schedule

Contact Information

Preparedness Program

Phone: (979) 458-5645
Email: preparedness@teex.tamu.edu

IMS350 – Industrial Incident Management Team – Expanded Response Phase

The course focuses on developing a team approach to industrial incident management in a fixed facility and/or operating region.  The course emphasizes the duties of the Industrial Incident Management Team (IMT) during the transition from the initial response phase to the expanded response phase.  And, throughout the expanded response phase until incident termination.   The course will utilize a customized, hypothetical incident scenario, that each client may experience at their facility/operating region, for training purposes.

The functions of Incident Command/Unified Command, Command Staff, and the General Staff, working on-scene and in an industrial Emergency Operations Center (EOC) environment, are stressed.  Participants will “role-play” their IMT position-specific duties and responsibilities during the course’s hypothetical scenario while being coached by TEEX Instructors.

Finally, the course includes completion of an entire Expanded Response Planning Cycle and the execution of each Planning Process Meeting.  As a result, the IMT participants will create a written Incident Action Plan (IAP), and supporting documents, specific to the hypothetical incident scenario.

Full course information and schedule

Contact Information

Emergency Services Training Institute
Phone: (979) 845-7641
Email: esti@teex.tamu.edu

HAZ004 – Hazardous Materials Refresher Training

This course utilizes both classroom lecture and field activities to meet or exceed Code of Federal Regulations (CFR) 1910.120 (q)(8)(i) annual refresher training requirements. 

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ006 – Hazwoper Refresher for Clean-Up Operations Training

This course utilizes both classroom lecture and field activities required to maintain competencies as Hazardous Waste Operations and Emergency Response (HAZWOPER) General or Occasional Site Workers. It is designed to meet or exceed Code of Federal Regulations (CFR) 1910.120 (e)(8) annual refresher training requirements. 

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

ASP231 – Advanced Hazardous Material Response

This class is for the hazardous materials responder that wants to take their skills to the next level through a non-certification scenario-based format. This week will challenge your past training at a technician or specialist level. Come prepared to use your leadership skills, diverse knowledge of chemicals, remediation skills, and decontamination techniques. Students will use both cognitive and hands–on skills to successfully mitigate a series of hazardous materials scenarios. By the end of the course, students will be able to identify hazards, incorporate air monitoring to develop the hot warm, and cold zones; demonstrate and explain the different types of decontamination processes; and describe the required medical management of patients involved in hazardous materials incident.

Full course information and schedule

Contact Information

Customer Service

Phone: (866) 878-8900
Email: annualschool@teex.tamu.edu

ASP430 – Estrategias para el control de incendios en tanques de almacenaje

Descripción

El curso contempla técnicas y estrategias para combatir incendios en áreas industriales, bajo planificación, tácticas, logísticas operativas y cálculos de espumas, entre otros aspectos relacionados a emergencias mayores.

Este curso no ofrece certificación Pro Board. Los que aprueben el curso recibirán el certificado TEEX.

Full course information and schedule

Contact Information

Customer Service
Datos de contacto
Phone: (866) 878-8900
Email: annualschool@teex.tamu.edu

HAZ026 – NFPA 472 Hazardous Materials Rail Specialist Training

This course meets or exceeds the National Fire Protection Association (NFPA) 472 Standard for Competence of Responders to Hazardous Materials/Weapons of Mass Destruction Incidents Chapter 12, “Competencies for Hazardous Materials Technicians with a Tank Car Specialty.”

Upon completion of this course you are eligible to take the National Board on Fire Service Professional Qualifications (Pro Board) written exam and skills testing.

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ027 – NFPA 472 Hazardous Materials Highway Specialist Training

This course meets or exceeds the criteria for National Fire Protection Association (NFPA) 472 Standard for Competence of Responders to Hazardous Materials/Weapons of Mass Destruction Incidents Chapter 13, “Competencies for Hazardous Materials Technicians with a Cargo Tank Specialty.”

Upon completion of this course you will be eligible to take the National Board on Fire Service Professional Qualifications (Pro Board) written exam and skills testing.

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manger
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ028 – NFPA 472 Hazardous Materials Intermodal Training

This course meets or exceeds the National Fire Protection Association (NFPA) 472 Standard for Competence of Responders to Hazardous Materials/Weapons of Mass Destruction Incidents Chapter 14, “Competencies for Hazardous Materials Technicians with an Intermodal Tank Specialty.”

Upon completion of this course you are eligible to take the National Board on Fire Service Professional Qualifications (Pro Board) written exam and skills testing.

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

HAZ029 – NFPA 472 Hazardous Materials Transportation Specialist Training

This course meets or exceeds the qualifications for National Fire Protection Association (NFPA) 472 Standard for Competence of Responders to Hazardous Materials/Weapons of Mass Destruction Incidents Chapters 12, 13, and 14 which train specialists to respond to tank car, cargo tank, and intermodal tank incidents.

Upon completion of this course students are eligible to take the National Board on Fire Service Professional Qualifications (Pro Board) written exam and skills testing.

Full course information and schedule

Contact Information

Nick Hickson
HazMat Training Manager
Phone: (979) 458-3640
Email: nicholas.hickson@teex.tamu.edu

IMS250 – Industrial Incident Management Team-Initial Response Phase & Tabletop Exercise

This course focuses on developing a team approach to industrial incident management in a fixed facility and/or operating region.  Emphasis is placed on the formation and duties of the Industrial Incident Management Team (IMT) during the initial response phase of an incident and can be customized, as desired.  The functions of Command, Command Staff, and General Staff, working on-scene and in an industrial Emergency Operations Center (EOC) environment, are stressed.  Further, specific emphasis is placed on establishing, managing, and supporting the Operations Section.

The course reviews IMT section and position-specific roles and responsibilities during the initial response phase including the creation of the ICS 201-Incident Briefing Form and the execution of the ICS 201 Incident Brief.

Full course information and schedule

Contact Information

Preparedness Program

Phone: (979) 458-5645
Email: preparedness@teex.tamu.edu

IMS350 – Industrial Incident Management Team – Expanded Response Phase

The course focuses on developing a team approach to industrial incident management in a fixed facility and/or operating region.  The course emphasizes the duties of the Industrial Incident Management Team (IMT) during the transition from the initial response phase to the expanded response phase.  And, throughout the expanded response phase until incident termination.   The course will utilize a customized, hypothetical incident scenario, that each client may experience at their facility/operating region, for training purposes.

The functions of Incident Command/Unified Command, Command Staff, and the General Staff, working on-scene and in an industrial Emergency Operations Center (EOC) environment, are stressed.  Participants will “role-play” their IMT position-specific duties and responsibilities during the course’s hypothetical scenario while being coached by TEEX Instructors.

Finally, the course includes completion of an entire Expanded Response Planning Cycle and the execution of each Planning Process Meeting.  As a result, the IMT participants will create a written Incident Action Plan (IAP), and supporting documents, specific to the hypothetical incident scenario.

Full course information and schedule

Contact Information

Emergency Services Training Institute
Phone: (979) 845-7641
Email: esti@teex.tamu.edu

LNG105 – LNG Workshop #1 – Production, Usage and Safety Overview

The Liquefied Natural Gas (LNG) Workshop 1: Production, Usage and Safety, live Zoom, provides you with an introduction to what LNG is, how it is made, what it’s common uses are, and how safe of a product it is in comparison to other hydrocarbons. This is a live online instructor-led training that provides for an interactive discussion and allows questions and answers as the information is presented.

Full course information and schedule

Contact Information

Kirk Richardson
Training Director
Phone: (979) 845-1158
Email: kirk.richardson@teex.tamu.edu

LNG106 – LNG Workshop #2 – Properties, Characteristics and Considerations of LNG

The Liquefied Natural Gas (LNG) Workshop 2: Properties, Characteristics and Considerations, live Zoom, provides you with an in-depth discussion on the properties and characteristics of LNG. We will also examine special considerations specific to LNG, such as Rapid Phase Transitions, cryogenic concerns, and explosion potential. This is a live online instructor-led training that provides for an interactive discussion and allows questions and answers as the information is presented.

Full course information and schedule

Contact Information

Kirk Richardson
Training Director
Phone: (979) 845-1158
Email: kirk.richardson@teex.tamu.edu

LNG107 – LNG Workshop #3 – Storage and Transportation Container Design

The Liquified Natural Gas (LNG) Workshop #3: LNG Transportation and Storage Containers, live Zoom, provides you with a discussion on the design of containers used for storage and transportation of LNG. We will identify construction material and design of the different containers as well as some of the safety systems in place to prevent over pressure or provide leak control. This is a live online instructor-led training that provides for an interactive discussion and allows questions and answers as the information is presented.

Full course information and schedule

Contact Information

Kirk Richardson
Training Director
Phone: (979) 845-1158
Email: Kirk.Richardson@teex.tamu.edu

LNG108 – LNG Workshop #4 – Incident Control

This Liquefied Natural Gas (LNG) Workshop #4: Incident Control, live webinar, provides you with an in-depth discussion on the appropriate tactics applied towards controlling and extinguishment of a LNG incident. We will also examine passive and active fire protection within LNG facilities and identify how they may be used outside of facilities as well. This is a live online instructor-led training that provides for an interactive discussion and allows questions and answers as the information is presented.

Full course information and schedule

Contact Information

Kirk Richardson
Training Director
Phone: (979) 845-1158
Email: kirk.richardson@teex.tamu.edu