OSHA-Authorized

The Cranes in Construction (OSHA #2055) course covers the best practices in crane and derrick operation using the OSHA Cranes and Derricks in Construction Rule as a guide. Course topics include hazards associated with crane assembly and disassembly, types of cranes, lifting concepts, rigging and wire rope, signaling, employee qualifications and training, and maintenance, repair, and inspection requirements. Students will participate in workshops to reinforce concepts of safe crane operation. Upon course completion, students will have the ability to identify the types of cranes and their components and attachments, determine safe operating conditions, and recognize common violations of OSHA Standards.NOTE: This course is taught in English. Show less

The Respiratory Protection (OSHA #2225) course covers the requirements for the establishment, maintenance, and monitoring of a respiratory protection program. Course topics include terminology, OSHA Respiratory Protection Standards, NIOSH certification, respiratory protection programs, and medical evaluation requirements. Program highlights include workshops on respirator selection, qualitative and quantitative fit testing, and the use of respiratory protection and support equipment. Upon course completion, students will have the ability to identify and describe the elements of a respiratory protection program, the proper selection, use, and inspection of respiratory protection, protection factors, and evaluate compliance with OSHA Standards.NOTE: This course is taught in English. Show less

The Excavation, Trenching, and Soil Mechanics (OSHA #3015) course covers the OSHA Excavation Standard and safety and health aspects of excavation and trenching. Course topics include practical soil mechanics and its relationship to the stability of shored and unshored slopes and walls of excavations, introduction of various types of shoring (wood timbers and hydraulic), soil classification, and use of protective systems. Testing methods are demonstrated and students participate in workshops in the use of instruments such as penetrometers, torvane shears, and engineering rods. Upon course completion, students will have the ability to assess their employer’s compliance with the OSHA Excavation Standard, utilize soil testing methods to classify soil types, determine protective systems for excavation operations, and training requirements.NOTE: This course is taught in English. Show less

The Principles of Scaffolding (OSHA #3085) course covers the requirements for safe construction and use of scaffolding using OSHA’s construction scaffold standards as a guide.  Course topics include hazards associated with scaffold design, assembly, disassembly and use, types of scaffolds, determining scaffold capacity, employee qualifications and training and maintenance, repair and inspection requirements.  Students will participate in workshops to reinforce concepts of safe scaffolding.  Upon course completion, students will have the ability to identify the types of scaffolds and their components, determine safe assembly, use and disassembly and recognize common violations of OSHA standards.NOTE: This course is taught in English. Show less

The Electrical Standards (OSHA #3095) course covers OSHA Electrical Standards and the hazards associated with electrical installations and equipment. Course topics include single- and three-phase systems, cord- and plug-connected and fixed equipment, grounding, ground fault circuit interrupters, and safety-related work practices. Emphasis is placed on electrical hazard recognition and OSHA Standards, policies, and procedures and applicable portions of the National Electrical Code (NEC). Students will participate in workshops on the safe and correct use of electrical testing equipment. Upon course completion, students will have the ability to understand the severity of electrical current on the human body, recognize and evaluate actual and potential electrical hazards and reference the applicable OSHA Standard, determine hazard abatement measures, and understand the proper use of electrical testing equipment.NOTE: This course is taught in English. Show less

The Fall Protection (OSHA #3115) course covers the OSHA Fall Protection Standard for construction and an overview of fall protection methods. Course topics include principles of fall protection, components and limitations of fall arrest systems, and OSHA Standards and policies regarding fall protection. Students will participate in workshops demonstrating the inspection and use of fall protection equipment, residential construction fall protection, training requirements, and developing a fall protection program. Upon course completion, students will have the ability to assess compliance with the OSHA Fall Protection Standard, evaluate installed passive systems and fall arrest systems, and develop and implement fall protection plans.NOTE: This course is taught in English. Show less

The Trainer Course in Occupational Safety and Health (OSHA) Standards for the Construction Industry course is designed for individuals interested in teaching the 10- and 30-hour construction safety and health Outreach Training Program to their employees and other interested groups. Using OSHA Construction Standards as a guide, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and the use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program, to conduct both 10- and 30-hour Construction Outreach classes, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized Outreach trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA Construction Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course.NOTE: In order to maintain trainer status, Authorized OSHA Outreach Trainers are required to attend the Update for Construction Industry Outreach Trainers (OSH502) course every four years.NOTE: This course is taught in English. Show less

The Update for Construction Industry Outreach Trainers (OSHA #502) course is designed for Outreach Training Program trainers who have completed OSHA #500 Trainer Course in Occupational Safety and Health Standards for the Construction Industry and are authorized trainers in the OSHA Outreach Training Program. The course provides an update on OSHA Construction Standards, policies, and regulations. Upon course completion students will have the ability to demonstrate continued professional development in their field by applying effective adult learning principles and interactive training techniques to clearly identify, define, and explain construction industry hazards and acceptable corrective measures as they continue to teach the 10- and 30-hour Construction Outreach Training Program classes.NOTE: In order to maintain trainer status, Authorized OSHA Outreach Trainers are required to attend the Update for Construction Industry Outreach Trainers (OSH502) course every four years.NOTE: This course is taught in English. Show less

The Occupational Safety and Health Standards for the Construction Industry (OSHA #510) covers OSHA Standards, policies, and procedures in the construction industry. Topics include scope and application of the OSHA Construction Standards, construction safety and health principles, and special emphasis on those areas in construction which are most hazardous. Upon course completion students will have the ability to define construction terms found in the OSHA Construction Standards, identify hazards which occur in the construction industry, locate and determine appropriate OSHA Construction Standards, policies, and procedures, and describe the use of the OSHA Construction Standards and regulations to supplement an ongoing safety and health program.NOTE: This course is taught in English. Show less

The OSHA Guide to Industrial Hygiene (OSHA #521) course covers industrial hygiene practices and related OSHA regulations and procedures. Course topics include recognition, evaluation, and control of chemical, physical, biological and ergonomic hazards, Permissible Exposure Limits (PEL), OSHA health standards, respiratory protection, engineering controls, OSHA sampling protocols and strategies, and workplace health program elements. The course features workshops in health hazard recognition, OSHA health standards and use of sampling equipment. Upon course completion, students will have the ability to recognize basic industrial hygiene principles and practices, identify characteristics of common air contaminants, locate PELs, perform basic industrial hygiene calculations, and determine methods for hazard control and abatement.NOTE: This course is taught in English. Show less

The Safe Bolting: Principles and Practices (OSHA #7110) course covers awareness of safety issues involved in bolting applications. Course topics include safe operation and handling of high powered bolting tools, pressure vessels and piping, machinery or mechanical joints, and structural connections. The course provides workshops and demonstrations of safe bolting applications. The target audience is first line mechanical operators including millwrights, pipefitters, and those who work with mechanical joints as part of their daily work. Upon course completion, the student will have the ability to understand the basic technology of bolted joints, safety principles associated with tool selection and operation, workplace conditions, and bolting methods and procedures. NOTE: Course topics vary by track. Show less

The Introduction to Evacuation and Emergency Planning (OSHA #7105) course covers OSHA requirements for emergency action and fire protection plans. Course topics include purpose and requirements of emergency action and fire prevention plans, elements of emergency evacuation plans, and features of design and maintenance of emergency exit routes. Students will participate in workshops pertaining to the development of emergency action plans. Upon course completion, students will have the ability to list the elements of an emergency action plan and emergency evacuation floor plans, recognize violations of OSHA exit route requirements, determine whether their organization requires an emergency action plan, and develop and implement workplace emergency action and fire protection plans.NOTE: This course is taught in English. Show less

The Health Hazard Awareness (OSHA #7205) course covers common health hazards that are encountered in the workplace. These health hazards include exposure to chemicals, asbestos, silica and lead. Course topics include identification and evaluation of health hazards and their sources of exposure, health hazard information, and engineering and work practice controls. Students participate in workshops on evaluation and abatement of workplace health hazards. Upon course completion, students will have the ability to understand common health hazards in the workplace and methods for controlling and abatement of these hazards.NOTE: This course is taught in English. Show less

OSH730 Understanding OSHA’s Permit-Required Confined Space Standard (OSHA #7300) is designed to provide an overview of the Occupational Safety and Health Administration (OSHA) standards for permit-required confined space (PRCS). This one-day course discusses the requirements of OSHA’s Permit-Required Confined Space Standard for General Industry (29 CFR 1910.146) and Construction (29 CFR 1926 Subpart AA). This course covers OSHA requirements, but does not feature hands-on sections.NOTE: This course is taught in English. Show less

The Fall Hazard Awareness for the Construction Industry (OSHA #7405) course covers the identification, evaluation, prevention and control of fall hazards in the construction industry. The course focuses on falls to a lower level rather than falls to the same level resulting from slips and falls. Course topics include identifying, analyzing, and preventing fall hazards utilizing Occupational Safety and Health Administration (OSHA) Fall Protection Standards. At the conclusion of the course, students will have an awareness level of identifying fall hazards and methods to control and abate the hazards.NOTE: This course is taught in English. Show less

The Managing Excavation Hazards (OSHA #7410) course covers the requirements to manage excavation/trenching operations. The course will include an understanding of the OSHA excavation requirements, excavation/trenching hazards, and control measures. Additionally, participants will learn about soil analysis techniques and protective system requirements. At the conclusion of this course, participants will understand how to manage excavation/trenching operations.NOTE: This course is taught in English. Show less

The Introduction to Safety and Health Management (OSHA #7500) course covers the effective implementation of a company’s safety and health management system. The course addresses the four core elements of an effective safety and health management system and those central issues that are critical to each element’s proper management. This course is an interactive training session focusing on class discussion and workshops. Upon course completion, students will have the ability to evaluate, develop, and implement an effective safety and health management system for their company.NOTE: This course is taught in English. Show less

The Introduction to Incident [Accident] Investigation (OSHA #7505) course covers an introduction to basic accident investigation procedures and describes accident analysis techniques. Course topics include reasons for conducting accident investigations, employer responsibilities related to workplace accident investigations, and a six-step accident investigation procedure. The target audience is the employer, manager, employee or employee representative who is involved in conducting accident and/or near-miss investigations. Upon course completion, students will have the basic skills necessary to conduct an effective accident investigation at the workplace.NOTE: This course is taught in English. Show less

The Recordkeeping Rule Seminar (OSHA #7845) course covers Occupational Safety and Health Administration (OSHA) requirements for maintaining and posting records of occupational injuries and illnesses and reporting specific cases to OSHA. Upon course completion, students will have the ability to identify OSHA requirements for recordkeeping, posting and reporting and to complete OSHA Form 300 Log of Work-Related Injuries and Illnesses, OSHA Form 300A Summary of Work-Related Injuries and Illnesses, and OSHA Form 301 Injury and Illness Incident Report.NOTE: This course is taught in English. Show less

This one-hour seminar will present the topic of trenching and excavation from a hazard perspective. Starting on the outside and then moving to the inside, not only will hazards be identified but effective control measures will also be discussed.

This Disaster Recovery course provides a strategic overview of the FEMA Public Assistance Process that is essential to disaster recovery for local communities. The FEMA Public Assistance Process provides funding for local  governments and eligible Private Non-Profit organizations to conduct effective long-term recovery. Unfortunately, many jurisdictions do not have a good understanding of this process and thereby fail to obtain, and retain, all the recovery revenue the community is eligible for. This course will provide senior leaders and staff planners with the key elements, milestones, and pitfalls to avoid when guiding a local jurisdictions recovery plans and operations. Show less

This course will provide an introduction to the FEMA Public Assistance Programs to help local jurisdictions better understand recovery and improve preparedness for the next disaster. Front line jurisdiction leaders and staff members will learn information to better assist their communities and eligible Private Non-Profit partners to prepare for and recover from disasters. Instructors will facilitate an understanding of how to identify and navigate disaster recovery resources by guiding students through the FEMA Public Assistance Process, providing best practices while avoiding major pitfalls. Many local jurisdictions lack a robust understanding of these processes and thereby fail to obtain, and retain, all the recovery revenue the community is eligible for. This course helps prepare communities to maximize recovery resources in a compliant manner thereby ensuring effective long term recovery from disaster. Show less

The Introduction to Evacuation and Emergency Planning (OSHA #7105) course covers OSHA requirements for emergency action and fire protection plans. Course topics include purpose and requirements of emergency action and fire prevention plans, elements of emergency evacuation plans, and features of design and maintenance of emergency exit routes. Students will participate in workshops pertaining to the development of emergency action plans. Upon course completion, students will have the ability to list the elements of an emergency action plan and emergency evacuation floor plans, recognize violations of OSHA exit route requirements, determine whether their organization requires an emergency action plan, and develop and implement workplace emergency action and fire protection plans.NOTE: This course is taught in English. Show less

The Hazardous Materials (OSHA #2015) course covers OSHA General Industry Standards and other consensus and proprietary standards that relate to the use of hazardous materials. Course topics include flammable and combustible liquids, compressed gases, LP-gases, and cryogenic liquids. Related processes such as spraying and dipping, and use of electrical equipment in hazardous locations are also discussed. Upon course completion, students will have the ability to assess compliance with OSHA hazardous materials standards, determine hazardous (classified) locations, and proper moving, storing, and handling of hazardous materials.NOTE: This course is taught in English. Show less

The Machinery and Machine Guarding Standards (OSHA #2045) course covers the various types of common machinery, machine safeguards, and related OSHA regulations and procedures. Guidance is provided on the hazards associated with various types of machinery and the determination of proper machine safeguards. Course topics include machinery processes, mechanical motions, points of operation, control of hazardous energy sources (lockout/tagout), common OSHA machine guarding violations, and guarding of portable powered tools, conveyors, and robotics. Program highlights include the ability to recognize hazards and provide options for control and hazard abatement through machine safeguarding inspection workshops. Upon course completion, students will have the ability to describe common machine hazards and sources of energy, identify resources for assisting with machine guarding issues, and determine methods of control and hazard abatement, and selection of appropriate machine safeguards.NOTE: This course is taught in English. Show less

The Respiratory Protection (OSHA #2225) course covers the requirements for the establishment, maintenance, and monitoring of a respiratory protection program. Course topics include terminology, OSHA Respiratory Protection Standards, NIOSH certification, respiratory protection programs, and medical evaluation requirements. Program highlights include workshops on respirator selection, qualitative and quantitative fit testing, and the use of respiratory protection and support equipment. Upon course completion, students will have the ability to identify and describe the elements of a respiratory protection program, the proper selection, use, and inspection of respiratory protection, protection factors, and evaluate compliance with OSHA Standards.NOTE: This course is taught in English. Show less

The Principles of Ergonomics (OSHA #2255) course covers the use of ergonomic principles to recognize, evaluate, and control workplace conditions that cause or contribute to musculoskeletal and nerve disorders. Course topics include work physiology, anthropometry, musculoskeletal disorders, use of video display terminals, and risk factors such as vibration, temperature, material handling, repetition, and lifting and patient transfers in health care. Course emphasis is on industrial case studies covering analysis and design of work stations and equipment workshops in manual lifting, and coverage of current OSHA compliance policies and guidelines. Upon course completion, students will have the ability to recognize work-related musculoskeletal and nerve disorders, assess employer’s ergonomic programs, and conduct ergonomic evaluations.NOTE: This course is taught in English. Show less

The Permit-Required Confined Space Entry (OSHA #2264) course covers the safety and health hazards associated with permit-required confined space entry. Course topics include recognition of confined space hazards, identification of permit and non-permit required confined spaces, use of instrumentation to evaluate atmospheric hazards, ventilation techniques, development and implementation of a confined space program, proper signage, and training requirements. This course features workshops on permit entry classification, instrumentation, and program development. Upon course completion, students will have the ability to identify permit and non-permit required confined spaces, reference the OSHA Permit-Required Confined Spaces Standard, conduct atmospheric testing, and implement a permit-required confined space program.NOTE: This course is taught in English. Show less

The Electrical Standards (OSHA #3095) course covers OSHA Electrical Standards and the hazards associated with electrical installations and equipment. Course topics include single- and three-phase systems, cord- and plug-connected and fixed equipment, grounding, ground fault circuit interrupters, and safety-related work practices. Emphasis is placed on electrical hazard recognition and OSHA Standards, policies, and procedures and applicable portions of the National Electrical Code (NEC). Students will participate in workshops on the safe and correct use of electrical testing equipment. Upon course completion, students will have the ability to understand the severity of electrical current on the human body, recognize and evaluate actual and potential electrical hazards and reference the applicable OSHA Standard, determine hazard abatement measures, and understand the proper use of electrical testing equipment.NOTE: This course is taught in English. Show less

The Trainer Course in Occupational Safety & Health Standards for General Industry (OSHA #501) is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program, to conduct both 10- and 30-hour General Industry Outreach classes, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course.NOTE: In order to maintain trainer status, Authorized OSHA Outreach Trainers are required to attend Update for General Industry Outreach Trainers (OSH503) course every four years.NOTE: This course is taught in English. Show less

 The Update for General Industry Outreach Trainers (OSHA #503) course is designed for Outreach Training Program trainers who have completed course #501 Trainer Course in Occupational Safety and Health Standards for General Industry and who are authorized trainers in the OSHA Outreach Training Program. The course provides an update on OSHA General Industry Standards, policies, and regulations. Upon course completion students will have the ability to demonstrate continued professional development in their field by applying effective adult learning principles and interactive training techniques to clearly identify, define, and explain general industry hazards and acceptable corrective measures as they continue to teach the 10- and 30-hour General Industry Outreach Training Program classes.NOTE: In order to maintain trainer status, Authorized OSHA Outreach Trainers are required to attend the Update for General Industry Outreach Trainers (OSH503) course every four years. NOTE: This course is taught in English. Show less

The Occupational Safety and Health Standards for General Industry (OSHA #511) course covers OSHA Standards, policies, and procedures in general industry. Topics include scope and application of the OSHA General Industry Standards, general industry principles and special emphasis on those areas in general industry which are most hazardous. Upon course completion, students will have the ability to define general industry terms found in the OSHA General Industry Standards, identify hazards which occur in general industry, locate and determine appropriate OSHA General Industry Standards, policies, and procedures, and describe the use of OSHA General Industry Standards and regulations to supplement an ongoing safety and health program.NOTE: This course is taught in English. Show less

The OSHA Guide to Industrial Hygiene (OSHA #521) course covers industrial hygiene practices and related OSHA regulations and procedures. Course topics include recognition, evaluation, and control of chemical, physical, biological and ergonomic hazards, Permissible Exposure Limits (PEL), OSHA health standards, respiratory protection, engineering controls, OSHA sampling protocols and strategies, and workplace health program elements. The course features workshops in health hazard recognition, OSHA health standards and use of sampling equipment. Upon course completion, students will have the ability to recognize basic industrial hygiene principles and practices, identify characteristics of common air contaminants, locate PELs, perform basic industrial hygiene calculations, and determine methods for hazard control and abatement.NOTE: This course is taught in English. Show less

The Lockout/Tagout (OSHA #7115) course covers the role and responsibility of the employer to develop and implement an energy control program, or lock-out/tag-out (LOTO) for the protection of workers while performing servicing and maintenance activities on machinery and equipment. Course topics include types of hazardous energy, detecting hazardous conditions, implementing control measures as they relate to the control of hazardous energy, developing and implementing energy control programs including written isolation procedures, training of authorized and affected employees, and periodic inspection of energy control procedures using the OSHA Control of Hazardous Energy Standard. Upon course completion, the student will have the ability to explain the importance of energy control programs, procedures, training, audits and methods of controlling hazardous energy.NOTE: This course is taught in English. Show less

The Introduction to Evacuation and Emergency Planning (OSHA #7105) course covers OSHA requirements for emergency action and fire protection plans. Course topics include purpose and requirements of emergency action and fire prevention plans, elements of emergency evacuation plans, and features of design and maintenance of emergency exit routes. Students will participate in workshops pertaining to the development of emergency action plans. Upon course completion, students will have the ability to list the elements of an emergency action plan and emergency evacuation floor plans, recognize violations of OSHA exit route requirements, determine whether their organization requires an emergency action plan, and develop and implement workplace emergency action and fire protection plans.NOTE: This course is taught in English. Show less

The Health Hazard Awareness (OSHA #7205) course covers common health hazards that are encountered in the workplace. These health hazards include exposure to chemicals, asbestos, silica and lead. Course topics include identification and evaluation of health hazards and their sources of exposure, health hazard information, and engineering and work practice controls. Students participate in workshops on evaluation and abatement of workplace health hazards. Upon course completion, students will have the ability to understand common health hazards in the workplace and methods for controlling and abatement of these hazards.NOTE: This course is taught in English. Show less

OSH730 Understanding OSHA’s Permit-Required Confined Space Standard (OSHA #7300) is designed to provide an overview of the Occupational Safety and Health Administration (OSHA) standards for permit-required confined space (PRCS). This one-day course discusses the requirements of OSHA’s Permit-Required Confined Space Standard for General Industry (29 CFR 1910.146) and Construction (29 CFR 1926 Subpart AA). This course covers OSHA requirements, but does not feature hands-on sections.NOTE: This course is taught in English. Show less

The Introduction to Safety and Health Management (OSHA #7500) course covers the effective implementation of a company’s safety and health management system. The course addresses the four core elements of an effective safety and health management system and those central issues that are critical to each element’s proper management. This course is an interactive training session focusing on class discussion and workshops. Upon course completion, students will have the ability to evaluate, develop, and implement an effective safety and health management system for their company.NOTE: This course is taught in English. Show less

The Introduction to Incident [Accident] Investigation (OSHA #7505) course covers an introduction to basic accident investigation procedures and describes accident analysis techniques. Course topics include reasons for conducting accident investigations, employer responsibilities related to workplace accident investigations, and a six-step accident investigation procedure. The target audience is the employer, manager, employee or employee representative who is involved in conducting accident and/or near-miss investigations. Upon course completion, students will have the basic skills necessary to conduct an effective accident investigation at the workplace.NOTE: This course is taught in English. Show less

The Recordkeeping Rule Seminar (OSHA #7845) course covers Occupational Safety and Health Administration (OSHA) requirements for maintaining and posting records of occupational injuries and illnesses and reporting specific cases to OSHA. Upon course completion, students will have the ability to identify OSHA requirements for recordkeeping, posting and reporting and to complete OSHA Form 300 Log of Work-Related Injuries and Illnesses, OSHA Form 300A Summary of Work-Related Injuries and Illnesses, and OSHA Form 301 Injury and Illness Incident Report.NOTE: This course is taught in English. Show less

The Hazardous Materials (OSHA #2015) course covers OSHA General Industry Standards and other consensus and proprietary standards that relate to the use of hazardous materials. Course topics include flammable and combustible liquids, compressed gases, LP-gases, and cryogenic liquids. Related processes such as spraying and dipping, and use of electrical equipment in hazardous locations are also discussed. Upon course completion, students will have the ability to assess compliance with OSHA hazardous materials standards, determine hazardous (classified) locations, and proper moving, storing, and handling of hazardous materials.NOTE: This course is taught in English. Show less

The Hazardous Materials (OSHA #2015) course covers OSHA General Industry Standards and other consensus and proprietary standards that relate to the use of hazardous materials. Course topics include flammable and combustible liquids, compressed gases, LP-gases, and cryogenic liquids. Related processes such as spraying and dipping, and use of electrical equipment in hazardous locations are also discussed. Upon course completion, students will have the ability to assess compliance with OSHA hazardous materials standards, determine hazardous (classified) locations, and proper moving, storing, and handling of hazardous materials.NOTE: This course is taught in English. Show less

The Machinery and Machine Guarding Standards (OSHA #2045) course covers the various types of common machinery, machine safeguards, and related OSHA regulations and procedures. Guidance is provided on the hazards associated with various types of machinery and the determination of proper machine safeguards. Course topics include machinery processes, mechanical motions, points of operation, control of hazardous energy sources (lockout/tagout), common OSHA machine guarding violations, and guarding of portable powered tools, conveyors, and robotics. Program highlights include the ability to recognize hazards and provide options for control and hazard abatement through machine safeguarding inspection workshops. Upon course completion, students will have the ability to describe common machine hazards and sources of energy, identify resources for assisting with machine guarding issues, and determine methods of control and hazard abatement, and selection of appropriate machine safeguards.NOTE: This course is taught in English. Show less

The Respiratory Protection (OSHA #2225) course covers the requirements for the establishment, maintenance, and monitoring of a respiratory protection program. Course topics include terminology, OSHA Respiratory Protection Standards, NIOSH certification, respiratory protection programs, and medical evaluation requirements. Program highlights include workshops on respirator selection, qualitative and quantitative fit testing, and the use of respiratory protection and support equipment. Upon course completion, students will have the ability to identify and describe the elements of a respiratory protection program, the proper selection, use, and inspection of respiratory protection, protection factors, and evaluate compliance with OSHA Standards.NOTE: This course is taught in English. Show less

The Principles of Ergonomics (OSHA #2255) course covers the use of ergonomic principles to recognize, evaluate, and control workplace conditions that cause or contribute to musculoskeletal and nerve disorders. Course topics include work physiology, anthropometry, musculoskeletal disorders, use of video display terminals, and risk factors such as vibration, temperature, material handling, repetition, and lifting and patient transfers in health care. Course emphasis is on industrial case studies covering analysis and design of work stations and equipment workshops in manual lifting, and coverage of current OSHA compliance policies and guidelines. Upon course completion, students will have the ability to recognize work-related musculoskeletal and nerve disorders, assess employer’s ergonomic programs, and conduct ergonomic evaluations.NOTE: This course is taught in English. Show less

The Permit-Required Confined Space Entry (OSHA #2264) course covers the safety and health hazards associated with permit-required confined space entry. Course topics include recognition of confined space hazards, identification of permit and non-permit required confined spaces, use of instrumentation to evaluate atmospheric hazards, ventilation techniques, development and implementation of a confined space program, proper signage, and training requirements. This course features workshops on permit entry classification, instrumentation, and program development. Upon course completion, students will have the ability to identify permit and non-permit required confined spaces, reference the OSHA Permit-Required Confined Spaces Standard, conduct atmospheric testing, and implement a permit-required confined space program.NOTE: This course is taught in English. Show less

The Electrical Standards (OSHA #3095) course covers OSHA Electrical Standards and the hazards associated with electrical installations and equipment. Course topics include single- and three-phase systems, cord- and plug-connected and fixed equipment, grounding, ground fault circuit interrupters, and safety-related work practices. Emphasis is placed on electrical hazard recognition and OSHA Standards, policies, and procedures and applicable portions of the National Electrical Code (NEC). Students will participate in workshops on the safe and correct use of electrical testing equipment. Upon course completion, students will have the ability to understand the severity of electrical current on the human body, recognize and evaluate actual and potential electrical hazards and reference the applicable OSHA Standard, determine hazard abatement measures, and understand the proper use of electrical testing equipment.NOTE: This course is taught in English. Show less

The Fall Protection (OSHA #3115) course covers the OSHA Fall Protection Standard for construction and an overview of fall protection methods. Course topics include principles of fall protection, components and limitations of fall arrest systems, and OSHA Standards and policies regarding fall protection. Students will participate in workshops demonstrating the inspection and use of fall protection equipment, residential construction fall protection, training requirements, and developing a fall protection program. Upon course completion, students will have the ability to assess compliance with the OSHA Fall Protection Standard, evaluate installed passive systems and fall arrest systems, and develop and implement fall protection plans.NOTE: This course is taught in English. Show less

The Trainer Course in Occupational Safety & Health Standards for General Industry (OSHA #501) is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program, to conduct both 10- and 30-hour General Industry Outreach classes, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course.NOTE: In order to maintain trainer status, Authorized OSHA Outreach Trainers are required to attend Update for General Industry Outreach Trainers (OSH503) course every four years.NOTE: This course is taught in English. Show less

 The Update for General Industry Outreach Trainers (OSHA #503) course is designed for Outreach Training Program trainers who have completed course #501 Trainer Course in Occupational Safety and Health Standards for General Industry and who are authorized trainers in the OSHA Outreach Training Program. The course provides an update on OSHA General Industry Standards, policies, and regulations. Upon course completion students will have the ability to demonstrate continued professional development in their field by applying effective adult learning principles and interactive training techniques to clearly identify, define, and explain general industry hazards and acceptable corrective measures as they continue to teach the 10- and 30-hour General Industry Outreach Training Program classes.NOTE: In order to maintain trainer status, Authorized OSHA Outreach Trainers are required to attend the Update for General Industry Outreach Trainers (OSH503) course every four years. NOTE: This course is taught in English. Show less

The Occupational Safety and Health Standards for General Industry (OSHA #511) course covers OSHA Standards, policies, and procedures in general industry. Topics include scope and application of the OSHA General Industry Standards, general industry principles and special emphasis on those areas in general industry which are most hazardous. Upon course completion, students will have the ability to define general industry terms found in the OSHA General Industry Standards, identify hazards which occur in general industry, locate and determine appropriate OSHA General Industry Standards, policies, and procedures, and describe the use of OSHA General Industry Standards and regulations to supplement an ongoing safety and health program.NOTE: This course is taught in English. Show less

The OSHA Guide to Industrial Hygiene (OSHA #521) course covers industrial hygiene practices and related OSHA regulations and procedures. Course topics include recognition, evaluation, and control of chemical, physical, biological and ergonomic hazards, Permissible Exposure Limits (PEL), OSHA health standards, respiratory protection, engineering controls, OSHA sampling protocols and strategies, and workplace health program elements. The course features workshops in health hazard recognition, OSHA health standards and use of sampling equipment. Upon course completion, students will have the ability to recognize basic industrial hygiene principles and practices, identify characteristics of common air contaminants, locate PELs, perform basic industrial hygiene calculations, and determine methods for hazard control and abatement.NOTE: This course is taught in English. Show less

The Introduction to Evacuation and Emergency Planning (OSHA #7105) course covers OSHA requirements for emergency action and fire protection plans. Course topics include purpose and requirements of emergency action and fire prevention plans, elements of emergency evacuation plans, and features of design and maintenance of emergency exit routes. Students will participate in workshops pertaining to the development of emergency action plans. Upon course completion, students will have the ability to list the elements of an emergency action plan and emergency evacuation floor plans, recognize violations of OSHA exit route requirements, determine whether their organization requires an emergency action plan, and develop and implement workplace emergency action and fire protection plans.NOTE: This course is taught in English. Show less

The Health Hazard Awareness (OSHA #7205) course covers common health hazards that are encountered in the workplace. These health hazards include exposure to chemicals, asbestos, silica and lead. Course topics include identification and evaluation of health hazards and their sources of exposure, health hazard information, and engineering and work practice controls. Students participate in workshops on evaluation and abatement of workplace health hazards. Upon course completion, students will have the ability to understand common health hazards in the workplace and methods for controlling and abatement of these hazards.NOTE: This course is taught in English. Show less

The Introduction to Safety and Health Management (OSHA #7500) course covers the effective implementation of a company’s safety and health management system. The course addresses the four core elements of an effective safety and health management system and those central issues that are critical to each element’s proper management. This course is an interactive training session focusing on class discussion and workshops. Upon course completion, students will have the ability to evaluate, develop, and implement an effective safety and health management system for their company.NOTE: This course is taught in English. Show less

The Introduction to Incident [Accident] Investigation (OSHA #7505) course covers an introduction to basic accident investigation procedures and describes accident analysis techniques. Course topics include reasons for conducting accident investigations, employer responsibilities related to workplace accident investigations, and a six-step accident investigation procedure. The target audience is the employer, manager, employee or employee representative who is involved in conducting accident and/or near-miss investigations. Upon course completion, students will have the basic skills necessary to conduct an effective accident investigation at the workplace.NOTE: This course is taught in English. Show less

The Recordkeeping Rule Seminar (OSHA #7845) course covers Occupational Safety and Health Administration (OSHA) requirements for maintaining and posting records of occupational injuries and illnesses and reporting specific cases to OSHA. Upon course completion, students will have the ability to identify OSHA requirements for recordkeeping, posting and reporting and to complete OSHA Form 300 Log of Work-Related Injuries and Illnesses, OSHA Form 300A Summary of Work-Related Injuries and Illnesses, and OSHA Form 301 Injury and Illness Incident Report.NOTE: This course is taught in English. Show less

The Trainer Course in Occupational Safety and Health (OSHA) Standards for the Construction Industry course is designed for individuals interested in teaching the 10- and 30-hour construction safety and health Outreach Training Program to their employees and other interested groups. Using OSHA Construction Standards as a guide, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and the use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program, to conduct both 10- and 30-hour Construction Outreach classes, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized Outreach trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA Construction Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course.NOTE: In order to maintain trainer status, Authorized OSHA Outreach Trainers are required to attend the Update for Construction Industry Outreach Trainers (OSH502) course every four years.NOTE: This course is taught in English. Show less

The Trainer Course in Occupational Safety & Health Standards for General Industry (OSHA #501) is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program, to conduct both 10- and 30-hour General Industry Outreach classes, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course.NOTE: In order to maintain trainer status, Authorized OSHA Outreach Trainers are required to attend Update for General Industry Outreach Trainers (OSH503) course every four years.NOTE: This course is taught in English. Show less

The Update for Construction Industry Outreach Trainers (OSHA #502) course is designed for Outreach Training Program trainers who have completed OSHA #500 Trainer Course in Occupational Safety and Health Standards for the Construction Industry and are authorized trainers in the OSHA Outreach Training Program. The course provides an update on OSHA Construction Standards, policies, and regulations. Upon course completion students will have the ability to demonstrate continued professional development in their field by applying effective adult learning principles and interactive training techniques to clearly identify, define, and explain construction industry hazards and acceptable corrective measures as they continue to teach the 10- and 30-hour Construction Outreach Training Program classes.NOTE: In order to maintain trainer status, Authorized OSHA Outreach Trainers are required to attend the Update for Construction Industry Outreach Trainers (OSH502) course every four years.NOTE: This course is taught in English. Show less

 The Update for General Industry Outreach Trainers (OSHA #503) course is designed for Outreach Training Program trainers who have completed course #501 Trainer Course in Occupational Safety and Health Standards for General Industry and who are authorized trainers in the OSHA Outreach Training Program. The course provides an update on OSHA General Industry Standards, policies, and regulations. Upon course completion students will have the ability to demonstrate continued professional development in their field by applying effective adult learning principles and interactive training techniques to clearly identify, define, and explain general industry hazards and acceptable corrective measures as they continue to teach the 10- and 30-hour General Industry Outreach Training Program classes.NOTE: In order to maintain trainer status, Authorized OSHA Outreach Trainers are required to attend the Update for General Industry Outreach Trainers (OSH503) course every four years. NOTE: This course is taught in English. Show less

The Managing Excavation Hazards (OSHA #7410) course covers the requirements to manage excavation/trenching operations. The course will include an understanding of the OSHA excavation requirements, excavation/trenching hazards, and control measures. Additionally, participants will learn about soil analysis techniques and protective system requirements. At the conclusion of this course, participants will understand how to manage excavation/trenching operations.NOTE: This course is taught in English. Show less

The Introduction to Incident [Accident] Investigation (OSHA #7505) course covers an introduction to basic accident investigation procedures and describes accident analysis techniques. Course topics include reasons for conducting accident investigations, employer responsibilities related to workplace accident investigations, and a six-step accident investigation procedure. The target audience is the employer, manager, employee or employee representative who is involved in conducting accident and/or near-miss investigations. Upon course completion, students will have the basic skills necessary to conduct an effective accident investigation at the workplace.NOTE: This course is taught in English. Show less

The Machinery and Machine Guarding Standards (OSHA #2045) course covers the various types of common machinery, machine safeguards, and related OSHA regulations and procedures. Guidance is provided on the hazards associated with various types of machinery and the determination of proper machine safeguards. Course topics include machinery processes, mechanical motions, points of operation, control of hazardous energy sources (lockout/tagout), common OSHA machine guarding violations, and guarding of portable powered tools, conveyors, and robotics. Program highlights include the ability to recognize hazards and provide options for control and hazard abatement through machine safeguarding inspection workshops. Upon course completion, students will have the ability to describe common machine hazards and sources of energy, identify resources for assisting with machine guarding issues, and determine methods of control and hazard abatement, and selection of appropriate machine safeguards.NOTE: This course is taught in English. Show less

The Cranes in Construction (OSHA #2055) course covers the best practices in crane and derrick operation using the OSHA Cranes and Derricks in Construction Rule as a guide. Course topics include hazards associated with crane assembly and disassembly, types of cranes, lifting concepts, rigging and wire rope, signaling, employee qualifications and training, and maintenance, repair, and inspection requirements. Students will participate in workshops to reinforce concepts of safe crane operation. Upon course completion, students will have the ability to identify the types of cranes and their components and attachments, determine safe operating conditions, and recognize common violations of OSHA Standards.NOTE: This course is taught in English. Show less

The Respiratory Protection (OSHA #2225) course covers the requirements for the establishment, maintenance, and monitoring of a respiratory protection program. Course topics include terminology, OSHA Respiratory Protection Standards, NIOSH certification, respiratory protection programs, and medical evaluation requirements. Program highlights include workshops on respirator selection, qualitative and quantitative fit testing, and the use of respiratory protection and support equipment. Upon course completion, students will have the ability to identify and describe the elements of a respiratory protection program, the proper selection, use, and inspection of respiratory protection, protection factors, and evaluate compliance with OSHA Standards.NOTE: This course is taught in English. Show less

The Excavation, Trenching, and Soil Mechanics (OSHA #3015) course covers the OSHA Excavation Standard and safety and health aspects of excavation and trenching. Course topics include practical soil mechanics and its relationship to the stability of shored and unshored slopes and walls of excavations, introduction of various types of shoring (wood timbers and hydraulic), soil classification, and use of protective systems. Testing methods are demonstrated and students participate in workshops in the use of instruments such as penetrometers, torvane shears, and engineering rods. Upon course completion, students will have the ability to assess their employer’s compliance with the OSHA Excavation Standard, utilize soil testing methods to classify soil types, determine protective systems for excavation operations, and training requirements.NOTE: This course is taught in English. Show less

The OSHA Guide to Industrial Hygiene (OSHA #521) course covers industrial hygiene practices and related OSHA regulations and procedures. Course topics include recognition, evaluation, and control of chemical, physical, biological and ergonomic hazards, Permissible Exposure Limits (PEL), OSHA health standards, respiratory protection, engineering controls, OSHA sampling protocols and strategies, and workplace health program elements. The course features workshops in health hazard recognition, OSHA health standards and use of sampling equipment. Upon course completion, students will have the ability to recognize basic industrial hygiene principles and practices, identify characteristics of common air contaminants, locate PELs, perform basic industrial hygiene calculations, and determine methods for hazard control and abatement.NOTE: This course is taught in English. Show less

OSH730 Understanding OSHA’s Permit-Required Confined Space Standard (OSHA #7300) is designed to provide an overview of the Occupational Safety and Health Administration (OSHA) standards for permit-required confined space (PRCS). This one-day course discusses the requirements of OSHA’s Permit-Required Confined Space Standard for General Industry (29 CFR 1910.146) and Construction (29 CFR 1926 Subpart AA). This course covers OSHA requirements, but does not feature hands-on sections.NOTE: This course is taught in English. Show less

The Introduction to Incident [Accident] Investigation (OSHA #7505) course covers an introduction to basic accident investigation procedures and describes accident analysis techniques. Course topics include reasons for conducting accident investigations, employer responsibilities related to workplace accident investigations, and a six-step accident investigation procedure. The target audience is the employer, manager, employee or employee representative who is involved in conducting accident and/or near-miss investigations. Upon course completion, students will have the basic skills necessary to conduct an effective accident investigation at the workplace.NOTE: This course is taught in English. Show less

The Hazardous Materials (OSHA #2015) course covers OSHA General Industry Standards and other consensus and proprietary standards that relate to the use of hazardous materials. Course topics include flammable and combustible liquids, compressed gases, LP-gases, and cryogenic liquids. Related processes such as spraying and dipping, and use of electrical equipment in hazardous locations are also discussed. Upon course completion, students will have the ability to assess compliance with OSHA hazardous materials standards, determine hazardous (classified) locations, and proper moving, storing, and handling of hazardous materials.NOTE: This course is taught in English. Show less

The Machinery and Machine Guarding Standards (OSHA #2045) course covers the various types of common machinery, machine safeguards, and related OSHA regulations and procedures. Guidance is provided on the hazards associated with various types of machinery and the determination of proper machine safeguards. Course topics include machinery processes, mechanical motions, points of operation, control of hazardous energy sources (lockout/tagout), common OSHA machine guarding violations, and guarding of portable powered tools, conveyors, and robotics. Program highlights include the ability to recognize hazards and provide options for control and hazard abatement through machine safeguarding inspection workshops. Upon course completion, students will have the ability to describe common machine hazards and sources of energy, identify resources for assisting with machine guarding issues, and determine methods of control and hazard abatement, and selection of appropriate machine safeguards.NOTE: This course is taught in English. Show less

The Cranes in Construction (OSHA #2055) course covers the best practices in crane and derrick operation using the OSHA Cranes and Derricks in Construction Rule as a guide. Course topics include hazards associated with crane assembly and disassembly, types of cranes, lifting concepts, rigging and wire rope, signaling, employee qualifications and training, and maintenance, repair, and inspection requirements. Students will participate in workshops to reinforce concepts of safe crane operation. Upon course completion, students will have the ability to identify the types of cranes and their components and attachments, determine safe operating conditions, and recognize common violations of OSHA Standards.NOTE: This course is taught in English. Show less

The Respiratory Protection (OSHA #2225) course covers the requirements for the establishment, maintenance, and monitoring of a respiratory protection program. Course topics include terminology, OSHA Respiratory Protection Standards, NIOSH certification, respiratory protection programs, and medical evaluation requirements. Program highlights include workshops on respirator selection, qualitative and quantitative fit testing, and the use of respiratory protection and support equipment. Upon course completion, students will have the ability to identify and describe the elements of a respiratory protection program, the proper selection, use, and inspection of respiratory protection, protection factors, and evaluate compliance with OSHA Standards.NOTE: This course is taught in English. Show less

The Principles of Ergonomics (OSHA #2255) course covers the use of ergonomic principles to recognize, evaluate, and control workplace conditions that cause or contribute to musculoskeletal and nerve disorders. Course topics include work physiology, anthropometry, musculoskeletal disorders, use of video display terminals, and risk factors such as vibration, temperature, material handling, repetition, and lifting and patient transfers in health care. Course emphasis is on industrial case studies covering analysis and design of work stations and equipment workshops in manual lifting, and coverage of current OSHA compliance policies and guidelines. Upon course completion, students will have the ability to recognize work-related musculoskeletal and nerve disorders, assess employer’s ergonomic programs, and conduct ergonomic evaluations.NOTE: This course is taught in English. Show less

The Permit-Required Confined Space Entry (OSHA #2264) course covers the safety and health hazards associated with permit-required confined space entry. Course topics include recognition of confined space hazards, identification of permit and non-permit required confined spaces, use of instrumentation to evaluate atmospheric hazards, ventilation techniques, development and implementation of a confined space program, proper signage, and training requirements. This course features workshops on permit entry classification, instrumentation, and program development. Upon course completion, students will have the ability to identify permit and non-permit required confined spaces, reference the OSHA Permit-Required Confined Spaces Standard, conduct atmospheric testing, and implement a permit-required confined space program.NOTE: This course is taught in English. Show less

The Excavation, Trenching, and Soil Mechanics (OSHA #3015) course covers the OSHA Excavation Standard and safety and health aspects of excavation and trenching. Course topics include practical soil mechanics and its relationship to the stability of shored and unshored slopes and walls of excavations, introduction of various types of shoring (wood timbers and hydraulic), soil classification, and use of protective systems. Testing methods are demonstrated and students participate in workshops in the use of instruments such as penetrometers, torvane shears, and engineering rods. Upon course completion, students will have the ability to assess their employer’s compliance with the OSHA Excavation Standard, utilize soil testing methods to classify soil types, determine protective systems for excavation operations, and training requirements.NOTE: This course is taught in English. Show less

The Principles of Scaffolding (OSHA #3085) course covers the requirements for safe construction and use of scaffolding using OSHA’s construction scaffold standards as a guide.  Course topics include hazards associated with scaffold design, assembly, disassembly and use, types of scaffolds, determining scaffold capacity, employee qualifications and training and maintenance, repair and inspection requirements.  Students will participate in workshops to reinforce concepts of safe scaffolding.  Upon course completion, students will have the ability to identify the types of scaffolds and their components, determine safe assembly, use and disassembly and recognize common violations of OSHA standards.NOTE: This course is taught in English. Show less

The Electrical Standards (OSHA #3095) course covers OSHA Electrical Standards and the hazards associated with electrical installations and equipment. Course topics include single- and three-phase systems, cord- and plug-connected and fixed equipment, grounding, ground fault circuit interrupters, and safety-related work practices. Emphasis is placed on electrical hazard recognition and OSHA Standards, policies, and procedures and applicable portions of the National Electrical Code (NEC). Students will participate in workshops on the safe and correct use of electrical testing equipment. Upon course completion, students will have the ability to understand the severity of electrical current on the human body, recognize and evaluate actual and potential electrical hazards and reference the applicable OSHA Standard, determine hazard abatement measures, and understand the proper use of electrical testing equipment.NOTE: This course is taught in English. Show less

The Fall Protection (OSHA #3115) course covers the OSHA Fall Protection Standard for construction and an overview of fall protection methods. Course topics include principles of fall protection, components and limitations of fall arrest systems, and OSHA Standards and policies regarding fall protection. Students will participate in workshops demonstrating the inspection and use of fall protection equipment, residential construction fall protection, training requirements, and developing a fall protection program. Upon course completion, students will have the ability to assess compliance with the OSHA Fall Protection Standard, evaluate installed passive systems and fall arrest systems, and develop and implement fall protection plans.NOTE: This course is taught in English. Show less

The Trainer Course in Occupational Safety and Health (OSHA) Standards for the Construction Industry course is designed for individuals interested in teaching the 10- and 30-hour construction safety and health Outreach Training Program to their employees and other interested groups. Using OSHA Construction Standards as a guide, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and the use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program, to conduct both 10- and 30-hour Construction Outreach classes, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized Outreach trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA Construction Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course.NOTE: In order to maintain trainer status, Authorized OSHA Outreach Trainers are required to attend the Update for Construction Industry Outreach Trainers (OSH502) course every four years.NOTE: This course is taught in English. Show less

The Trainer Course in Occupational Safety & Health Standards for General Industry (OSHA #501) is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program, to conduct both 10- and 30-hour General Industry Outreach classes, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course.NOTE: In order to maintain trainer status, Authorized OSHA Outreach Trainers are required to attend Update for General Industry Outreach Trainers (OSH503) course every four years.NOTE: This course is taught in English. Show less

The Update for Construction Industry Outreach Trainers (OSHA #502) course is designed for Outreach Training Program trainers who have completed OSHA #500 Trainer Course in Occupational Safety and Health Standards for the Construction Industry and are authorized trainers in the OSHA Outreach Training Program. The course provides an update on OSHA Construction Standards, policies, and regulations. Upon course completion students will have the ability to demonstrate continued professional development in their field by applying effective adult learning principles and interactive training techniques to clearly identify, define, and explain construction industry hazards and acceptable corrective measures as they continue to teach the 10- and 30-hour Construction Outreach Training Program classes.NOTE: In order to maintain trainer status, Authorized OSHA Outreach Trainers are required to attend the Update for Construction Industry Outreach Trainers (OSH502) course every four years.NOTE: This course is taught in English. Show less

 The Update for General Industry Outreach Trainers (OSHA #503) course is designed for Outreach Training Program trainers who have completed course #501 Trainer Course in Occupational Safety and Health Standards for General Industry and who are authorized trainers in the OSHA Outreach Training Program. The course provides an update on OSHA General Industry Standards, policies, and regulations. Upon course completion students will have the ability to demonstrate continued professional development in their field by applying effective adult learning principles and interactive training techniques to clearly identify, define, and explain general industry hazards and acceptable corrective measures as they continue to teach the 10- and 30-hour General Industry Outreach Training Program classes.NOTE: In order to maintain trainer status, Authorized OSHA Outreach Trainers are required to attend the Update for General Industry Outreach Trainers (OSH503) course every four years. NOTE: This course is taught in English. Show less

The Occupational Safety and Health Standards for the Construction Industry (OSHA #510) covers OSHA Standards, policies, and procedures in the construction industry. Topics include scope and application of the OSHA Construction Standards, construction safety and health principles, and special emphasis on those areas in construction which are most hazardous. Upon course completion students will have the ability to define construction terms found in the OSHA Construction Standards, identify hazards which occur in the construction industry, locate and determine appropriate OSHA Construction Standards, policies, and procedures, and describe the use of the OSHA Construction Standards and regulations to supplement an ongoing safety and health program.NOTE: This course is taught in English. Show less

The Occupational Safety and Health Standards for General Industry (OSHA #511) course covers OSHA Standards, policies, and procedures in general industry. Topics include scope and application of the OSHA General Industry Standards, general industry principles and special emphasis on those areas in general industry which are most hazardous. Upon course completion, students will have the ability to define general industry terms found in the OSHA General Industry Standards, identify hazards which occur in general industry, locate and determine appropriate OSHA General Industry Standards, policies, and procedures, and describe the use of OSHA General Industry Standards and regulations to supplement an ongoing safety and health program.NOTE: This course is taught in English. Show less

The OSHA Guide to Industrial Hygiene (OSHA #521) course covers industrial hygiene practices and related OSHA regulations and procedures. Course topics include recognition, evaluation, and control of chemical, physical, biological and ergonomic hazards, Permissible Exposure Limits (PEL), OSHA health standards, respiratory protection, engineering controls, OSHA sampling protocols and strategies, and workplace health program elements. The course features workshops in health hazard recognition, OSHA health standards and use of sampling equipment. Upon course completion, students will have the ability to recognize basic industrial hygiene principles and practices, identify characteristics of common air contaminants, locate PELs, perform basic industrial hygiene calculations, and determine methods for hazard control and abatement.NOTE: This course is taught in English. Show less

The Safe Bolting: Principles and Practices (OSHA #7110) course covers awareness of safety issues involved in bolting applications. Course topics include safe operation and handling of high powered bolting tools, pressure vessels and piping, machinery or mechanical joints, and structural connections. The course provides workshops and demonstrations of safe bolting applications. The target audience is first line mechanical operators including millwrights, pipefitters, and those who work with mechanical joints as part of their daily work. Upon course completion, the student will have the ability to understand the basic technology of bolted joints, safety principles associated with tool selection and operation, workplace conditions, and bolting methods and procedures. NOTE: Course topics vary by track. Show less

The Lockout/Tagout (OSHA #7115) course covers the role and responsibility of the employer to develop and implement an energy control program, or lock-out/tag-out (LOTO) for the protection of workers while performing servicing and maintenance activities on machinery and equipment. Course topics include types of hazardous energy, detecting hazardous conditions, implementing control measures as they relate to the control of hazardous energy, developing and implementing energy control programs including written isolation procedures, training of authorized and affected employees, and periodic inspection of energy control procedures using the OSHA Control of Hazardous Energy Standard. Upon course completion, the student will have the ability to explain the importance of energy control programs, procedures, training, audits and methods of controlling hazardous energy.NOTE: This course is taught in English. Show less

The Introduction to Evacuation and Emergency Planning (OSHA #7105) course covers OSHA requirements for emergency action and fire protection plans. Course topics include purpose and requirements of emergency action and fire prevention plans, elements of emergency evacuation plans, and features of design and maintenance of emergency exit routes. Students will participate in workshops pertaining to the development of emergency action plans. Upon course completion, students will have the ability to list the elements of an emergency action plan and emergency evacuation floor plans, recognize violations of OSHA exit route requirements, determine whether their organization requires an emergency action plan, and develop and implement workplace emergency action and fire protection plans.NOTE: This course is taught in English. Show less

The Health Hazard Awareness (OSHA #7205) course covers common health hazards that are encountered in the workplace. These health hazards include exposure to chemicals, asbestos, silica and lead. Course topics include identification and evaluation of health hazards and their sources of exposure, health hazard information, and engineering and work practice controls. Students participate in workshops on evaluation and abatement of workplace health hazards. Upon course completion, students will have the ability to understand common health hazards in the workplace and methods for controlling and abatement of these hazards.NOTE: This course is taught in English. Show less

OSH730 Understanding OSHA’s Permit-Required Confined Space Standard (OSHA #7300) is designed to provide an overview of the Occupational Safety and Health Administration (OSHA) standards for permit-required confined space (PRCS). This one-day course discusses the requirements of OSHA’s Permit-Required Confined Space Standard for General Industry (29 CFR 1910.146) and Construction (29 CFR 1926 Subpart AA). This course covers OSHA requirements, but does not feature hands-on sections.NOTE: This course is taught in English. Show less

The Fall Hazard Awareness for the Construction Industry (OSHA #7405) course covers the identification, evaluation, prevention and control of fall hazards in the construction industry. The course focuses on falls to a lower level rather than falls to the same level resulting from slips and falls. Course topics include identifying, analyzing, and preventing fall hazards utilizing Occupational Safety and Health Administration (OSHA) Fall Protection Standards. At the conclusion of the course, students will have an awareness level of identifying fall hazards and methods to control and abate the hazards.NOTE: This course is taught in English. Show less

The Managing Excavation Hazards (OSHA #7410) course covers the requirements to manage excavation/trenching operations. The course will include an understanding of the OSHA excavation requirements, excavation/trenching hazards, and control measures. Additionally, participants will learn about soil analysis techniques and protective system requirements. At the conclusion of this course, participants will understand how to manage excavation/trenching operations.NOTE: This course is taught in English. Show less

The Introduction to Safety and Health Management (OSHA #7500) course covers the effective implementation of a company’s safety and health management system. The course addresses the four core elements of an effective safety and health management system and those central issues that are critical to each element’s proper management. This course is an interactive training session focusing on class discussion and workshops. Upon course completion, students will have the ability to evaluate, develop, and implement an effective safety and health management system for their company.NOTE: This course is taught in English. Show less

The Introduction to Incident [Accident] Investigation (OSHA #7505) course covers an introduction to basic accident investigation procedures and describes accident analysis techniques. Course topics include reasons for conducting accident investigations, employer responsibilities related to workplace accident investigations, and a six-step accident investigation procedure. The target audience is the employer, manager, employee or employee representative who is involved in conducting accident and/or near-miss investigations. Upon course completion, students will have the basic skills necessary to conduct an effective accident investigation at the workplace.NOTE: This course is taught in English. Show less

The Recordkeeping Rule Seminar (OSHA #7845) course covers Occupational Safety and Health Administration (OSHA) requirements for maintaining and posting records of occupational injuries and illnesses and reporting specific cases to OSHA. Upon course completion, students will have the ability to identify OSHA requirements for recordkeeping, posting and reporting and to complete OSHA Form 300 Log of Work-Related Injuries and Illnesses, OSHA Form 300A Summary of Work-Related Injuries and Illnesses, and OSHA Form 301 Injury and Illness Incident Report.NOTE: This course is taught in English. Show less

This one-hour seminar will present the topic of trenching and excavation from a hazard perspective. Starting on the outside and then moving to the inside, not only will hazards be identified but effective control measures will also be discussed.